 |
Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 15 Fax +49 / 21 62 / 3 36 48 |
|||||
|
Porsche |
|
|||||
|
Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 15 Fax +49 / 21 62 / 3 36 48 |
|||||
|
Porsche |
|
|||||
|
Tools
CLUTCH ALIGNMENT TOOL
|
|||
| 027 0500 | Clutch alignment tool, beetle, 12.47- | EUR 3.90
|
|
FLY WHEEL LOCK
|
|||
| 027 0510 | Fly wheel lock | EUR 9.50
|
|
ENGINE HOLDER
This air cooled engine holder can be mount at your bench. Swivel sphere: 360°
|
|||
| 027 0550 | Engine holder | EUR 38.50
|
|
ENGINE STAND, UNIVERSAL
Very stable quality, universal engine attachment.
|
|||
| 027 0581 | Engine stand, universal (delivery without engine) | EUR 69.00
|
|
ENGINE TROLLEY
|
|||
| 027 0590 | Engine trolley | EUR 39.00
|
|
PULLER FOR OIL PRESSURE PLUNGER
|
|||
| 027 0577 | Puller for oil pressure regulation plunger | EUR 49.00
|
|
DISTRIBUTOR DRIVE PULLER
Easily removes distributor drive dog.
|
|||
| 027 0515 | Distributor drive puller | EUR 49.90
|
|
PISTON RING COMPRESSOR
|
|||
| 027 0520 | Piston ring compressor, 83-87 mm | EUR 6.90
|
|
|
|||
| 027 0525 | Piston ring compressor, 88-94 mm | EUR 6.90
|
|
CLUTCH ADJUSTING WRENCH
Makes clutch adjusting a cinch.
|
|||
| 027 0530 | Clutch adjusting wrench | EUR 9.90
|
|
DECK HEIGHT MEASURING TOOL
|
|||
| 027 0567 | Deck height measuring tool | EUR 49.00
|
|
AXLE NUT TOOL
Remove rear axle nuts with this tool and your 1/2" breaker bar.
|
|||
| 027 0535 | Axle nut tool (36 mm) | EUR 12.70
|
|
|
|||
| 027 0536 | Axle nut tool (46 mm) | EUR 12.70
|
|
DRIVE SOCKET, 36 MM, 1/2" DRIVE
For rear brake drums, type 1 fly wheels, cooling fan
|
|||
| 027 0533 | Drive socket, 36 mm, 1/2" drive | EUR 9.80
|
|
PUSH ROD, ADJUSTABLE
to determine simply the necessary length of a push rod.
|
|||
| 027 0527 | Push rod, adjustable | EUR 19.00
|
|
BRAKE BLEEDER
|
|||
| 027 0537 | Brake bleeder | EUR 19.50
|
|
VALVE LIFTER RETAINING CLIPS
Holds lifter in place during engine assembly.
|
|||
| 027 0528 | Valve lifter retaining clips, pair | EUR 9.80
|
|
CARBURETOR SYNCHRONIZER
Easy to use air gauge allows for accurate synchronization of dual carburetors.
|
|||
| 027 0545 | Carburetor synchronizer | EUR 44.50
|
|
FLYWHEEL DOWEL PIN FIXTURE
Provides perfect positioning for drilling extra dowel pin holes in crank & flywheel for 8-dowel pin installation.
|
|||
| 027 0483 | Flywheel dowel pin fixture | EUR 39.00
|
|
VALVE GUIDE DRILL
Removes 8mm valve stem guides.
|
|||
| 027 0486 | Valve guide drill, 8mm | EUR 47.50
|
|
IN-CAR VALVE SPRING COMPRESSOR
Removes valve springs without cylinder head removal. Requires minimal air pressure.
|
|||
| 027 0489 | Valve spring removal tool | EUR 99.90
|
|
BENCH MOUNT HEAD ASSEMBLY TOOL
Bench model for easy removal of valve springs.
|
|||
| 027 0492 | Bench mount head assembly tool | EUR 48.00
|
|
SPARK PLUG THREAD REPAIR INSERT
|
|||
| 027 0570 | Tap & Reamer tool | EUR 68.50
|
|
|
|||
| 027 0575 | Spark plug inserts, pair | EUR 4.30
|
|
ON BOARD TOOL SET
Original set from Mexico beetle.
|
|||
| 027 0753 | On board tool set, 4 pieces | EUR 29.90
|
|
MEASURING PLATE FOR CRANK SHAFT
|
|||
| 027 0560 | Measuring plate for crank shaft | EUR 8.30
|
|
MEASURING PLATE FOR CRANK CASE BORE
|
|||
| 027 0564 | Measuring plate for crank case bore | EUR 9.90
|
|
END-PLAY MEASURING TOOL
Accurately measure crankshaft end play
|
|||
| 027 0546 | End-play measuring tool | EUR 28.00
|
|
CRANK PULLEY PULLING AID TOOL
Helps to remove crankshaft pulley
|
|||
| 027 0540 | Crank pulley pulling aid tool | EUR 43.50
|
|
OIL PUMP PULLER
|
|||
| 027 0538 | Oil pump puller | EUR 8.00
|
|
OIL FILLER NUT TOOL
Easily remove or install oil filler.
|
|||
| 027 0543 | Oil filler nut tool | EUR 13.80
|
|
JACK, STANDARD
|
|||
| 027 0760 | Jack, standard, Mexico | EUR 39.00
|
|
HYDRAULIC LIFTING JACK
Solid workshop quality with 2 flexible wheels. Measurement: about 520 x 220 x 148 mm, weight: 13,2 kg.
Load capacity: 2 tons, TÜV-tested
|
|||
| 027 0030 | Hydraulic lifting jack | EUR 19.90
|
|
HYDRAULIC LIFTING JACK WITH SAFETY VALVE
Load capacity: 2 tons, TÜV-tested / weight: about 3 kg
Lifiting height: 120 mm, max: 296 mm
|
|||
| 027 0050 | Hydraulic lifting jack for 2 tons | EUR 17.90
|
|
UNDERFRAMES
Solid quality, 4-times adjustable, load capacity: 2 tons, TÜV-tested, height: about 280 mm / max: 385 mm, weight: 1.6 kg
|
|||
| 027 0090 | Underframe, piece | EUR 12.70
|
|
PRESS-IN PLATE FOR FLYWHEEL OIL SEAL
|
|||
| 027 0542 | Press-in plate for flywheel oil seal, type 1 | EUR 17.50
|
|
JET REAMER KIT
| Measures | 0.5 / 0.6 / 0.7 / 0.8 |
| 0.9 / 1.0 / 1.1 / 1.2 | |
| 1.4 / 1.6 / 1.8 / 2.0 |
Practical for carburetor setting or carburetor overhauling.
|
|||
| 027 0544 | Jet reamer kit, 12-pieces | EUR 23.90
|
|
TOOL BOX FOR SPARE WHEEL
This tool box comes without the shown tools. With brand emblem. This tool box can be placed into the wheel but it does only fit 5-hole-wheels.
|
|||
| 027 0553 | Tool box (reproduction) for spare wheel | EUR 119.00
|
|
ACCESSORIES FOR TOOL BOX
|
|||
| 027 0556 | Wheel crank for tool box 027 0553 | EUR 0.00
|
|
|
|||
| 027 0557 | Ring key 36/21, for tool box 027 0553 | EUR 0.00
|
|
TOOL BOX "EMPI" FOR SPARE WHEEL, WITH TOOLS
Content: 1 universal pliers, 1 water-pump pliers, 3 screwdrivers, 1 wheel wrench,
1 open-end / box wrench, 13+14, 1 open-end wrench 7+8 / 10+12, 1 box wrench 21/36, 1
spark-plug wrench
This tool box can be placed into the wheel but it does only fit 5-hole-wheels.
|
|||
| 027 0551 | Tool box "EMPI" for spare wheel | EUR 198.00
|
|
C.V. JOINT BOLT SOCKET
For 12-Point Hex Socket, 8mm 3/8" drive
|
|||
| 027 0481 | C.V. joint 12-point hex socket, 8mm, 3/8" drive | EUR 7.50
|
|
WHEEL NUT WRENCH
|
|||
| 027 0675 | Wheel nut wrench | EUR 9.90
|
|
4-WAY LUG METRIC WRENCH
Fits most metric lug nuts and bolts.
|
|||
| 027 0660 | 4-way lug metric wrench | EUR 4.90
|
|
CRANKSHAFT GEAR PULLER
|
|||
| 027 0518 | Crankshaft gear puller | EUR 115.00
|
|
WORKSHOP HAND LAMP
Rubust, impact-resistant, dust- and splash-protected hand lamp. 220 V / 8 W, with 5m resistance cable.
|
|||
| 027 0630 | Workshop hand lamp | EUR 12.50
|
|
CAR TEST LAMP
Workshop type made of brass with screwable protecting cap, thin test pin and cable with alligator clip fur use on 6-24 Volt.
|
|||
| 027 0640 | Car test lamp | EUR 4.90
|
|
CALIBER
Precision model, nickel-plated.
|
|||
| 027 0610 | Caliber | EUR 6.50
|
|
WHEEL PAINTING COVER
|
|||
| 027 0805 | Wheel painting cover | EUR 6.50
|
|
| |
Hoffmann
Speedster Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen Tel: +49 / 21 62 / 93 26 15 Fax: +49 / 21 62 / 3 36 48 e-mail: info@hoffmann-speedster.com |
