Homepage Teile Vertriebs GmbH
Gerberstr. 138-142
D - 41748 Viersen / Germany
Tel.       +49 / 21 62 / 93 26 15
Fax       +49 / 21 62 /   3 36 48


e-mail
E-Mail



How to order

Suchen
Search

Karmann Ghia

germanenglishfrench

 Beetle

Golf & Co.

Bus T1, T2 + T3

Porsche

Engine components

SHORT BLOCK, STANDARD, 1600 CCM

Brand new short block from VW-production with new components as crank case, crankshaft, camshaft, piston and cylinders, cylinder heads and 200 mm flywheel 12V

stroke:   69 mm
drilling: 85,5 mm
cylinder heads: typ 040 standard
camshaft: standard
fly wheel: 200 mm, 12 Volt

 

 
020 0060-2 Short block, standard

EUR   2199.00
VAT included,
plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

ENGINE, COMPLETE, WITH STANDARD IGNITION SYSTEM, GENERATOR

With standard ignition system (009 distributer).
Engine comes complete with fan shroud, heat exchangers and 009 distributor.
With generator.

For a bigger picture please click here -->

 

 
020 0043 Engine, complete, 1600 ccm, VW Mexico, with standard ignition system and GENERATOR

EUR   3149.00
VAT included,
plus freight cost

ENGINE CHANGE OVER KIT "STANDARD"

The kit contains:

  • 2 cylinder heads, standard, cpl.
  • 4 piston and cylinders, 85,5 x 69 mm, standard, 1600 ccm
  • 1 engine gasket set, standard, 1300-1600 ccm
  • 1 flywheel oil seal
    •
  • 1 push rod tubes, 1300-1600
  • 1 tube gasket glue
 

 
020 0093 Engine change over kit, standard

EUR   525.00
VAT included,
plus freight cost

ENGINE CHANGE OVER KIT "UNLEADED"

The kit contains:

  • 2 cylinder heads 041, unleaded
  • 4 piston and cylinders, 88 x 69 mm, Slip In
  • 1 engine gasket set, standard, 1300-1600 ccm
  • 1 flywheel oil seal
  • 1 push rod tubes, 1300-1600
  • 1 tube gasket glue
 

 
020 0090-1 Engine change over kit "unleaded", Slip In

EUR   679.00
VAT included,
plus freight cost

ENGINE CHANGE OVER KIT "UNLEADED"

With this kit you can change over your 1300, 1500 and 1600 ccm engine to unleaded fuel. All standard parts are replaced by the new parts of the kit.

The kit contains:

  • 4 piston and cylinders 85,5 x 69 mm
  • 2 cylinder heads
  • 1 set of push rod tubes
  • 1 engine gasket set
  • 1 tube gasket glue
 

 
020 0090 Engine change over kit, unleaded

EUR   549.00
VAT included,
plus freight cost

ENGINE KIT  "STREET" 1679 CCM

Engine kit to start with professional tuning.

The kit contains:

  • 4 piston and cylinders 88 x 69 mm
  • 1 cam OZ 268°/Lift 8,86
  • 1 camshaft bearing set
  • 1 "Maxi" oil pump incl. lfilter
  • 1 engine gasket set compl.
  • 1 tube gasket glue
  • 1 special intake manifolds for Solex PICT carburetor
 

 
010 0060 Engine kit "Street", 1679 ccm

EUR   585.00
VAT included,
plus freight cost

ENGINE KIT "STANDARD PLUS"

Engine kit complete for tuning or complete overhaul. Can be mount with simple tools and contains only brand-new parts.

The kit contains:

  • 4 piston and cylinders 85,5 x 69 mm
  • 2 cylinder heads, standard
  • 1 crank shaft, standard, 69 mm, new
  • 1 connecting rods, standard (Set)
  • 8 valve lifters
  • 1 main bearing set, standard
  • 1 connecting rod bearing set, standard
  • 1 windage push rod tubes
  • 1 camshaft gear assembly kit without distributor drive
  • 1 camshaft bearing set
  • 1 fly wheel oil seal
  • 1 engine gasket set
  • 1 tube gasket glue
 

 
020 0095 Engine kit "Standard Plus"

EUR   929.00
VAT included,
plus freight cost

ENGINE KIT "STANDARD PLUS/PLUS"

Engine kit complete for tuning or complete overhaul. Can be mount with simple tools and contains only brand-new parts.

The kit contains:

  • 4 piston and cylinders 85,5 x 69 mm
  • 2 cylinder heads 041, unleaded
  • 1 crank shaft, standard, 69 mm, new
  • 1 connecting rods, standard (Set)
  • 8 valve lifters
  • 1 main bearing set, standard
  • 1 connecting rod bearing set, standard
  • 1 windage push rod tubes
  • 1 camshaft gear assembly kit without distributor drive
  • 1 camshaft bearing set
  • 1 fly wheel oil seal
  • 1 engine gasket set
  • 1 tube gasket glue
020 0095-07 Engine kit "Standard Plus / plus"

EUR   929.00
VAT included,
plus freight cost

ENGINE KIT  "NEW RACE" 1776 CCM

1.8 l engine kit special for two single carburetors.

The kit contains:

  • 4 piston and cylinders, 90,5 x 69 mm
  • 1 cam OZ 280° / Lift 8,64
  • 1 "Maxi" oil pump incl. filter
  • 1 engine gasket set
  • 1 crank shaft 69 mm
  • 1 hot rod set
  • 1 main bearing set
  • 1 connecting rod set
  • 1 fly wheel oil seal
  • 1 tube gasket glue
 

 
010 0070 Engine kit "New Race" 1776 ccm

EUR   839.00
VAT included,
plus freight cost

WASHER, CYLINDER HEAD

Type 1, 1.2-1.6

 

 
010 1003-09 Washer for cylinder head, 10 mm, .56-

EUR   0.49
VAT included,
plus freight cost
 

 
010 1003-10 Washer for cylinder head, 8 mm, .56-

EUR   0.70
VAT included,
plus freight cost

FIXING NUT FOR CYLINDER HEAD

Type 1, 1.2-1.6

 

 
010 1003-12 Fixing nut for cylinder head, 10 mm, .56-

EUR   1.00
VAT included,
plus freight cost
 

 
010 1003-13 Fixing nut for cylinder head, 8 mm, .56-

EUR   1.00
VAT included,
plus freight cost

STUD KIT, 8 MM, SINGLE PORT HEADS

Stud kit for single port heads, fit for standard crank case. Manufactured of special steel. Comes in set of 16 pieces incl. nuts and washers.

Length: 9 pieces = 23.8 cm, 7 pieces = 20.3 cm

 

 
010 1004 Stud kit, 8mm, single port heads, 1300-1600 ccm

EUR   28.50
VAT included,
plus freight cost

STUD KIT, 8 MM, DUAL PORT HEADS

Stud kit for dual port heads, fit for standard crank case. Manufactured of special steel. Comes in set of 16 pieces incl. nuts and washers.

Length: 9 pieces = 23.5 cm, 3 pieces = 19.9 cm und 4 pieces = 18.5 cm

 

 
010 1001 Stud kit, 8mm, dual port heads, 1500-1600 ccm

EUR   28.00
VAT included,
plus freight cost

SELF TAPPING CASE STUDS, 10 mm

For quick repair of stripped head studs. The rolled-thread of these 10 mm studs provide maximum hold and metal chips are effectively collected by the slot or hole design (see enlargement in picture).

 

 
010 1003-03 Stud, 10 mm, 178 mm, 1200 ccm, upper, piece

EUR   6.50
VAT included,
plus freight cost
 

 
010 1003-04 Stud, 10 mm, 230 mm, 1200 ccm, lower, piece

EUR   6.50
VAT included,
plus freight cost
 

 
010 1003-05 Stud, 10 mm, 204 mm, 1500-1600 ccm, upper, piece

EUR   6.90
VAT included,
plus freight cost
 

 
010 1003-06 Stud, 10 mm, 240 mm, 1500-1600 ccm, lower, piece

EUR   6.90
VAT included,
plus freight cost

CASE SAVER INSERTS

Repair stripped and worn head stud threads. Case savers provide greater hold.

 

 
010 0999 Case saver inserts, 14/10mm, pair

EUR   2.10
VAT included,
plus freight cost

CRANK CASE

New standard crank case with 12 mm main oilpressure canal and 12 mm thread inserts. The casting is made of stable AS 41 alloy (4%aluminium, 1% silicium). Thus the crank case is more stable than the former cases of AS 21 alloy.

010 0003 Crank case, standard, 1300-1600

EUR   489.00
VAT included,
plus freight cost
 

 
010 0003-01 Crank case, standard, original part, 1300-1600

EUR   530.00
VAT included,
plus freight cost

Crank cases are also available rebored.

010 0003-10 Crank case, rebored for 90.5 or 92 mm cylinders

EUR   595.00
VAT included,
plus freight cost
010 0003-20 Crank case, rebored for 94 mm cylinders

EUR   595.00
VAT included,
plus freight cost

CRANK CASE, ELECTRICAL FUEL PUMP, ORIGINAL PART

Like 010 0003-01 but without openings for fuel pump, no attach for Bus engine support (3 drillings)

 

 
010 0003-04 Crank case, eletrical fuel pump, original part

EUR   575.00
VAT included,
plus freight cost

CAMSHAFT END PLUG RUBBER

Should be renewed on each engine check.

 

 
010 1014 Plastic end plug rubber, camshaft

EUR   2.90
VAT included,
plus freight cost
 

 
010 1014-01 Metal end plug rubber, camshaft

EUR   3.50
VAT included,
plus freight cost

SCREWS FOR ENGINE MOUNT

 

 
010 0993 (1) Hammer screw engine mount, M10x110

EUR   2.80
VAT included,
plus freight cost
010 0992 (2) Hexagonal screw engine mount M10x70

EUR   1.70
VAT included,
plus freight cost
010 0990 (3) Pin screw engine mount M10x82

EUR   1.70
VAT included,
plus freight cost

OIL SUCK IN TUBE

 

 
010 0005-03 Oil suck in tube, type 1, 14 mm

EUR   21.00
VAT included,
plus freight cost

CRANK CASE REPAIR KIT

German OE-quality.

 

 
010 1005 Crank case repair kit

EUR   17.90
VAT included,
plus freight cost

ENGINE HARDWARE KIT

Complete set of high quality nuts, washers, etc. for engine assembly.

 

 
020 0268 Engine hardware kit

EUR   24.80
VAT included,
plus freight cost

STOP NUT SET FOR CRANK CASE TYPE 1

 

 
020 0270 Stop nut set for crank case type 1

EUR   5.50
VAT included,
plus freight cost

CRANK SHAFT, STANDARD, NEW

 

 
010 0013 Stock crankshaft, standard, new

EUR   169.00
VAT included,
plus freight cost

CRANK SHAFT, FORGED

Forged counter-weighted crank shaft for stock rods.

 

 
010 0009 Crank shaft, forged, 76 mm

EUR   359.00
VAT included,
plus freight cost
010 0010 Crank shaft, forged, 78 mm

EUR   499.00
VAT included,
plus freight cost

DOWEL PINS

Manufactured of special tempered steel. Comes in set of 4 pieces.

 

 
010 0130 Dowel pins, diameter: 80mm, Karmann, 1.2-1.6, 8.60-, 34PS-

EUR   6.90
VAT included,
plus freight cost

DOWEL PINS FOR CRANK SHAFT / FLYWHEEL

Comes in set of 8 pieces. They are needed to repair widened pin holes.

 

 
010 0131 Dowel pins for crank shaft/flywheel, 8.7 mm (outsize), Karmann, 1.2-1.6, 8.60-, 34PS-

EUR   19.90
VAT included,
plus freight cost

WASHER, CYLINDER HEAD

 

 
010 1003-09 Washer for cylinder head, 10 mm, .56-

EUR   0.49
VAT included,
plus freight cost

COMPENSATING WASHER

Compensating washer between cylinder head and cylinder.

 

 
010 0540-02 Compensating washer, 94 x 85 x 1 mm, Karmann Ghia, 1.5-1.6

EUR   1.50
VAT included,
plus freight cost

PISTON AND CYLINDERS, CAST

Comes as complete kit with:

  • 4 pistons with wrist pins and locks
  • 4 cylinders and
  • 4 sets of piston rings

For 1500/1600 ccm engines you can mount piston and cylinders with 85,5 x 69 mm standard (part-no.: 010 0510), 88 x 69 mm "Slip IN" (part-no.: 010 0512) or 87 x 69 mm (part-no.: 010 0513) without further mechanical treatment of engine bloc and cylinder heads.

**For bigger piston and cylinder kits it's necessary to rebore according to the size. For repair use it is also possible to order single piston/cylinder.

010 0507 Piston and cylinder set, 1300 ccm, normal compression

EUR   209.00
VAT included,
plus freight cost
010 0507-E Piston and cylinder, 1300 ccm, normal compression, single

EUR   58.00
VAT included,
plus freight cost
010 0504 Piston and cylinder set, 83 x 69 mm, 1500 ccm, 44/45 PS

EUR   309.00
VAT included,
plus freight cost
010 0510 Piston and cylinder set, 85.5 x 69 mm, 1600 ccm, standard

EUR   153.00
VAT included,
plus freight cost
010 0510-E Piston and cylinder, 85,5 x 69 mm, 1600 ccm, standard, single

EUR   41.90
VAT included,
plus freight cost
 

 
010 0513 Piston and cylinder set, 87 x 69 mm, 1640 ccm, cast

EUR   212.00
VAT included,
plus freight cost
010 0513-E Piston and cylinder, 87 x 69 mm, 1640 ccm, single

EUR   59.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, 30 PS

Comes as complete kit with:

  • 4 pistons with wrist pins and locks
  • 4 cylinders and
  • 4 sets of piston rings
 

 
010 0475 Piston and cylinder set, 30 PS

EUR   410.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS "MAHLE PLUS"

85,5 x 69 mm, cast, 1584 ccm

Contents:

4 x piston and cylinders
8 push rod tubes
complete engine gasket set and flywheel oil seal
1 tube gasket glue

For a bigger picture please click here -->

 

 
010 0510-P Piston and cylinder set "MAHLE PLUS", 85.5 x 69 mm, 1584 ccm

EUR   179.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, FORGED

These piston and cylinder can be mounted without further mechanical treatment of engine bloc and cylinder heads.

 

 
010 0512 Piston and cylinder set, 88 x 69 mm, "Slip In", 1679 ccm, for standard crank shaft, forged

EUR   269.00
VAT included,
plus freight cost
010 0512-E Piston and cylinder, 88 x 69 mm, "SLIP IN", 1679 ccm, for standard crank shaft, forged, single

EUR   73.00
VAT included,
plus freight cost
010 0514 Piston and cylinder set, 87 x 69 mm, 1640 ccm, forged

EUR   269.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDER

On these piston and cylinder sets it is necessary to rebore the crank case or the cylinder heads.

 

 
010 0515 Piston and cylinder set, 90.5 x 69 mm, 1776 ccm, for standard crank shaft

EUR   265.00
VAT included,
plus freight cost
010 0515-E Piston and cylinder, 90,5 x 69 mm, 1780 ccm, single

EUR   73.00
VAT included,
plus freight cost
010 0517 Piston and cylinder set, 92 x 69 mm, 1835 ccm, for standard crank shaft

EUR   265.00
VAT included,
plus freight cost
010 0517-E Piston and cylinder, 92 x 69 mm, 1835 ccm, single

EUR   73.00
VAT included,
plus freight cost
010 0519 Piston and cylinder set, 94 x 69 mm, 1915 ccm

EUR   269.00
VAT included,
plus freight cost
010 0519-E Piston and cylinder set, 94 x 69 mm, single

EUR   74.50
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDER

For crankshafts with big stroke. Crank case and cylinders heads have to be rebored.

 

 
010 0450 Piston and cylinder set, 90.5 x 82 mm, 2100 ccm

EUR   269.00
VAT included,
plus freight cost
010 0460 Piston and cylinder set, 92 x 82 mm, 2180 ccm

EUR   269.00
VAT included,
plus freight cost
010 0467 Piston and cylinder set, 94 x 82 mm, 2300 ccm

EUR   269.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, BUS T2

Comes as complete kit with:

  • 4 pistons with wrist pins and locks
  • 4 cylinders and
  • 4 sets of piston rings
 

 
010 0470 Piston and cylinder set, 94 x 71 mm, Bus T2, 2000 ccm, 8.75 - 12.82

EUR   309.00
VAT included,
plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

TEFLON WRIST PIN BUTTONS

Teflon wrist pin buttons are easy to install and will not brake or wear out. You can install Teflon wrist  pin buttons in less time than stock clips. Teflon buttons ar shipped in complete sets for one engine.

 

 
020 0280 Teflon wrist pin buttons, for 85.5 pistons, set

EUR   19.90
VAT included,
plus freight cost
020 0282 Teflon wrist pin buttons, for 87 pistons, set

EUR   19.90
VAT included,
plus freight cost
020 0284 Teflon wrist pin buttons buttons, for 88 pistons, set

EUR   19.90
VAT included,
plus freight cost
020 0286 Teflon wrist pin buttons, for 90.5 pistons, set

EUR   19.90
VAT included,
plus freight cost
020 0288 Teflon wrist pin buttons, for 92.5 pistons, set

EUR   19.90
VAT included,
plus freight cost
020 0290 Teflon wrist pin buttons, for 94 pistons, set

EUR   19.90
VAT included,
plus freight cost

CYLINDER HEAD, STANDARD, SINGLE PORT, BARE

 

 
010 0403-04 Cylinder head, standard, bare, single port, 1500-1600 ccm

EUR   198.00
VAT included,
plus freight cost

ENGINE GASKET SETS

Complete engine gasket sets without flywheel oil seal.

 

 
010 1009 Motordichtsatz, Standard, 1200 ccm (30 PS)

EUR   14.90
VAT included,
plus freight cost
 

 
010 1010 Motordichtsatz, Standard, 1200 ccm (34 PS)

EUR   15.50
VAT included,
plus freight cost
 

 
010 1010-04 Motordichtsatz, Standard, 1200 ccm (34 PS), MADE IN GERMANY

EUR   36.50
VAT included,
plus freight cost
010 1011 Motordichtsatz, Standard, 1300-1600 ccm

EUR   12.00
VAT included,
plus freight cost
 

 
010 1011-X Motordichtsatz, Standard, 1300-1600 ccm, MADE IN GERMANY

EUR   21.00
VAT included,
plus freight cost

FLYWHEEL OIL SEAL

Should be renewed on each engine check.

 

 
010 1013 Flywheel oil seal, standard, from 34HP on

EUR   3.60
VAT included,
plus freight cost
 

 
010 1013-10 Flywheel oil seal, silicone red, from 34HP on

EUR   4.70
VAT included,
plus freight cost
010 1013-6 Flywheel oil seal, 1200 ccm, 25/30 HP, diameter 80 mm

EUR   6.00
VAT included,
plus freight cost

GASKET GLUE

 

 
020 0295 Gasket glue 3M, 90 ml tube

EUR   7.50
VAT included,
plus freight cost
 

 
020 0297 Gasket glue "Hylomar", 80 ml tube

EUR   9.90
VAT included,
plus freight cost

BARREL SHIMS

 

 
010 0530 Barrel shims, 0.25 / 85.5

EUR   12.00
VAT included,
plus freight cost
010 0531 Barrel shims, 0.5 / 85.5

EUR   12.00
VAT included,
plus freight cost
010 0532 Barrel shims, 1.0 / 85.5

EUR   12.00
VAT included,
plus freight cost
010 0535 Barrel shims, 0.25 / 90.5 and 92

EUR   12.00
VAT included,
plus freight cost
010 0536 Barrel shims, 0.5 / 90.5 and 92

EUR   12.00
VAT included,
plus freight cost
010 0537 Barrel shims, 1.0 / 90.5 and 92

EUR   12.00
VAT included,
plus freight cost

PISTON RINGS

Set is complete for one piston.

 

 
010 0521 Piston rings, 85,5 mm

EUR   10.00
VAT included,
plus freight cost
010 0521-03 Piston rings, 86 mm (0.5 mm oversize)

EUR   13.90
VAT included,
plus freight cost
010 0522 Piston rings, 88 mm

EUR   13.90
VAT included,
plus freight cost
010 0525 Piston rings, 90,5 mm

EUR   13.50
VAT included,
plus freight cost
010 0526 Piston rings, 87 mm, for 010 0513

EUR   13.50
VAT included,
plus freight cost
010 0526-03 Piston rings, 88 mm, for 010 0512

EUR   13.50
VAT included,
plus freight cost
010 0527 Piston rings, 92 mm

EUR   13.50
VAT included,
plus freight cost

CONNECTING RODS, STANDARD

Set of 4 pieces. Fits 1300-1600 ccm.

 

 
010 0021 Connecting rod, standard, set

EUR   169.00
VAT included,
plus freight cost

HOT RODS

Allows use of 76 mm crank shafts without big changes in the crank case. For 78 or 82 mm crank shafts small changes at the crank case are neccessary.

Set contains 4 matching rods.

 

 
010 0022 Hot rods, set

EUR   193.00
VAT included,
plus freight cost

CONNECTING ROD ACCESSORIES

 

 
010 0018 Connecting rod screw, standard, .66- (8 pieces necessary for 1 motor)

EUR   5.70
VAT included,
plus freight cost
 

 
010 0018-05 Connecting rod nut (8 pieces necessary for 1 motor)

EUR   1.70
VAT included,
plus freight cost

BUSHING FOR CONNECTING RODS

 

 
010 0168 Bushing for connecting rods, for 20 mm piston pin, Karmann, 1.2, 25-34PS

EUR   13.90
VAT included,
plus freight cost
 

 
010 0170 Bushing for connecting rods, for 22 mm piston pin, Karmann, 1.3-1.6, 8.65-7.74

EUR   8.90
VAT included,
plus freight cost

FLYWHEEL, STANDARD

7,3 kg. Crank shaft and flywheel must always been balanced together !!

 

 
010 0110 Flywheel, 200 mm, 12 V, ring gear: 130 teeth, Karmann, 1.6, 8.70-7.74, 50PS

EUR   93.00
VAT included,
plus freight cost

FLYWHEEL, LIGHTENED

Lightened flywheel, 5,5 kg, 200 mm, with 8 dowel pin holes. Crank shaft and flywheel must always been balanced together !!

 

 
010 0101 Flywheel, lightened, 200 mm, 12 V, ring gear: 130 teeth, Karmann, 1.6, 8.70-7.74, 50PS

EUR   93.00
VAT included,
plus freight cost

ACCESSORIES FOR FLYWHEELS

 

 
010 0135 Flywheel shim, 0.24mm, Karmann Ghia,
1.2-1.6, 8.60-

EUR   1.60
VAT included,
plus freight cost
 

 
010 0137 Flywheel shim, 0.30mm, Karmann Ghia,
1.2-1.6, 8.60-

EUR   1.40
VAT included,
plus freight cost
 

 
010 0137-04 Flywheel shim, 0.32mm, Karmann Ghia,
1.2-1.6, 8.60-

EUR   1.80
VAT included,
plus freight cost
 

 
010 0137-05 Flywheel shim, 0.34mm, Karmann Ghia,
1.2-1.6, 8.60-

EUR   2.20
VAT included,
plus freight cost
 

 
010 1008 O-ring seal for flywheel, Karmann Ghia,
1.2-1.6, 8.60-

EUR   1.50
VAT included,
plus freight cost

GLAND NUT, STANDARD

Gland nut for flywheel. Necessary to renew the gland nut after each remove of the flywheel from the crankshaft.

 

 
010 0122 Gland nut, standard, Karmann Ghia, 1.2-1.6, 8.60-

EUR   9.90
VAT included,
plus freight cost
 

 
010 0125 Lock plate gland nut, Karmann Ghia, 1.2-1.6 all

EUR   1.80
VAT included,
plus freight cost

NEEDLE BEARING FOR GLAND NUT / CRANKSHAFT

 

 
010 0123 Needle bearing for gland nut / crankshaft, Karmann Ghia, 1.2-1.6, 8.60-

EUR   4.90
VAT included,
plus freight cost

GLAND NUT, REINFORCED

Gland nut for flywheel. Necessary to renew the gland nut after each remove of the flywheel from the crankshaft.

 

 
010 0120 Gland nut, reinforced, Hohlschraube, verstärkt, Karmann Ghia, 1.2-1.6, 8.60-

EUR   34.90
VAT included,
plus freight cost

CAM SHAFT, "ENGLE"

Please order cam gear and screws separately !!!

 

 
010 0214-05 Cam shaft, Engle 276°

EUR   109.00
VAT included,
plus freight cost
010 0216-05 Cam shaft, Engle 284°

EUR   109.00
VAT included,
plus freight cost
010 0219-05 Cam shaft, Engle 295°

EUR   109.00
VAT included,
plus freight cost

CAM GEAR FOR SPORT CAMS "ENGLE"

 

 
010 0210 Cam gear for sport cams "ENGLE"

EUR   38.00
VAT included,
plus freight cost

BOLTS FOR CAM GEAR 010 0210

 

 
010 0209 Cam gear bolts for cam gear 010 0210, set

EUR   2.50
VAT included,
plus freight cost

CAM GEAR, ADJUSTABLE

Oblique toothed cam gear for optimal setting (+ / -4°) of cam to crank shaft. 
Setting is possible to make after remove of oil pump.

 

 
010 0212 Cam gear, adjustable

EUR   59.00
VAT included,
plus freight cost

DISTRIBUTOR DRIVE GEAR PINION

 

 
010 0161 Distributor drive gear pinion, Karmann Ghia, 1.6, 8.65-

EUR   36.00
VAT included,
plus freight cost

DISTRIBUTOR DRIVE GEAR PINION, SPECIAL

Only for type 1 engines running with an electrical fuel pump. 
Without drive for fuel pump push rod.

 

 
010 0161-04 Distributor drive gear pinion, special, 1.2-1.6, 8.64-, 34PS-

EUR   43.00
VAT included,
plus freight cost

DISTRIBUTOR DRIVE GEAR

 

 
010 0162 Distributor drive gear (brass), Karmann Ghia, 1.6, 8.65-

EUR   19.50
VAT included,
plus freight cost

CAMSHAFT TIMING GEAR

 

 
010 0163 Camshaft timing gear,
Karmann Ghia, 1.6, 8.65-

EUR   17.70
VAT included,
plus freight cost

LOCK RING FOR CRANKSHAFT GEAR WHEEL

Don't use removed lock rings again because they get wider on removal and do not fit correctely.

 

 
010 0164-03 Lock ring for crankshaft wheel gear, Karmann Ghia, 1.6, 8.65-

EUR   2.20
VAT included,
plus freight cost

SPACER RING FOR CRANKSHAFT WHEEL GEAR

 

 
010 0164-02 Spacer ring for crankshaft wheel gear, Karmann Ghia, 1.6, 8.65-

EUR   7.70
VAT included,
plus freight cost

OIL DEFLECTOR

Oil deflectors prevent oil leakage at the pulley.

 

 
010 0164-05 Oil deflector, Karmann Ghia, 1.6, 8.65-

EUR   2.90
VAT included,
plus freight cost

SPRING FOR DISTRIBUTOR DRIVE

 

 
010 0166 Spring for distributor drive, Karmann Ghia, 1.6, 8.65-

EUR   1.80
VAT included,
plus freight cost

WOODRUFF KEY PULLEY / CAMSHAFT GEAR

 

 
010 0167-03 Woodruff key, small, for pulley, Karmann Ghia, 1.6, 8.65-

EUR   2.20
VAT included,
plus freight cost
 

 
010 0167-04 Woodruff key, big, for camshaft gear, Karmann Ghia, 1.6, 8.65-

EUR   2.90
VAT included,
plus freight cost

WASHER FOR DISTRIBUTOR DRIVE

 

 
010 0165 Washer for distributor drive, Karmann Ghia, 1.6, 8.65-

EUR   2.20
VAT included,
plus freight cost

VALVE SPRING RETAINERS, STANDARD

Comes in set of 8 pieces.

 

 
010 0330 Valve spring retainers, standard, steel

EUR   6.00
VAT included,
plus freight cost

VALVE SPRING RETAINERS, ALUMINIUM

Comes in set of 8 pieces.

 

 
010 0333 Valve spring retainers, aluminium

EUR   24.00
VAT included,
plus freight cost

VALVE ADJUSTMENT SCREWS, STANDARD

Valve adjustment screws with nut. Comes in set of 8 pieces.

 

 
020 0098 Valve adjustment screws, standard, Karmann Ghia, 1.2-1.6, 8.60-, measure: M8x26mm, set

EUR   9.80
VAT included,
plus freight cost

 



Hoffmann Speedster Teile Vertriebs GmbH
 Gerberstr. 138-142
D - 41748 Viersen
Tel: +49 / 21 62 / 93 26 15
Fax: +49 / 21 62 / 3 36 48
e-mail: info@hoffmann-speedster.com