![]() |
Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 15 Fax +49 / 21 62 / 3 36 48 |
|||||
|
Karmann Ghia |
||||||
Oil System Components
SCREW PLUG, OIL PRESSURE REGUALTION
|
|||
| 010 0739 | Screw plug for oil pressure regulation plunger, M18x1.5, for type 1 engines 34PS-50PS | EUR 5.70
|
|
OIL FILLER TUBE, STANDARD, BLACK
This oil filler tube comes WITHOUT cap and WITHOUT condenser tube !!!
|
|||
| 020 0480-04 | Oil filler tube, standard, black, Karmann Ghia, 1.2-1.6, 34 PS on | EUR 17.50
|
|
OIL PUMP, STANDARD
With 21 mm long gearwheels for 6 or 8 mm studs.
Only suitable for cam shafts with 3-bolts fixation up to 1971.
Check your application (cam gear fixed on cam with 3 or 4 bolts) carefully before ordering. Disregard can damage your engine !!
HEAVY DUTY OIL PUMPS
With 26 mm long gearwheels for 6 or 8 mm studs
Only suitable for cam shafts with 3-bolts fixation up to 1971.
Check your application (cam gear fixed on cam with 3 or 4 bolts) carefully before ordering. Disregard can damage your engine !!
GASKET SET, OIL SUMP PLATE
Complete oil change kit. Includes gaskets and sealing washers.
|
|||
| 020 0450 | Gasket set, oil sump plate | EUR 1.00
|
|
|
|||
| 020 0450-03 | Gasket set, oil sump plate, Made in Germany | EUR 1.40
|
|
OIL COOLER SEAL (CYLINDRICAL)
|
|||
| 010 1023-05 | Oil cooler seal´(cylindrical), for standard oil cooler, Karmann Ghia, 1.2-1.5, -7.69 | EUR 1.20
|
|
PROTECTING CAP FOR FLAT-TYPE CONNECTOR
|
|||
| 020 5276 | Protecting cap for flat-type connector oil-pressure switch | EUR 1.50
|
|
SUPPLEMENTARY OIL SUMP, MINI
Increases the oil volume. Comes with different connections and seals.
You can further use the standard oil drain plug or you can exchange to the magnetic oil drain plug (010 1060).
|
|||
| 010 0708 | Supplementary oil sump, mini, kit | EUR 45.00
|
|
HOSE CLAMPS
extra strong, galvanized
Hose clamp 020 0500-04 fits for
020 0010
Manifold boot for air intake (you need 1 piece)
|
|||
| 020 0500-04 | Hose clamp, 35-50 mm | EUR 1.80
|
|
Hose clamp 020 0500-08 fits for
010 2350
Axle boot (you need 1 piece)
010 2351
Axle boot (you need 1 piece)
010 2352
Axle boot (you need 1 piece)
010 2570
Axle boot (you need 1 piece)
010 2570-01
Axle boot (you need 1 piece)
020 0010
Manifold boot for air intake (you need 1 piece)
|
|||
| 020 0500-08 | Hose clamp, 40-60 mm | EUR 2.40
|
|
Hose clamp 020 0500-10 fits for
010 2350
Axle boot (you need 1 piece)
010 2351
Axle boot (you need 1 piece)
010 2352
Axle boot (you need 1 piece)
010 2570
Axle boot (you need 1 piece)
010 2570-01
Axle boot (you need 1 piece)
|
|||
| 020 0500-10 | Hose clamp, 80-100 mm | EUR 2.90
|
|
| |
Hoffmann
Speedster Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen Tel: +49 / 21 62 / 93 26 15 Fax: +49 / 21 62 / 3 36 48 e-mail: info@hoffmann-speedster.com |