ONLINE-CATALOG
for Karmann Ghia

NEWS

Engine
  Carburetors
  Clutch
  Engine accessories
  Engine
  components
  Oil system
  components

Exhaust
  Various things

Electrical section
  Electrical parts
  Ignition
  Lighting system

Interior accessories
  Various things
  VDO-Instruments

Exterior accessories
  Body parts
  Various things
  Vitrage

Suspension parts
  Various things

Brake
  Various things

Rubber parts
  Various things

... and finally
  Gifts
  Model cars
  Tools

Suspension parts

---

SHOCK ABSORBER BUSHING

020 4235-07	Shock absorber bushing, for standard shock absorbers only, Karmann Ghia, .50-	EUR   3.00 VAT included, plus freight cost

---

SCREW FOR SHOCK ABSORBER SUPPORT, M12 x 1.5 x 80mm

020 4235-11	Screw for shock absorber support, rear, M12x1.5x80mm, Karmann Ghia 1.59- for swing axle upper and lower, Karmann Ghia 8.67- for IRS axle, upper only	EUR   3.00 VAT included, plus freight cost

---

RUBBER STOP, REAR AXLE, URETHANE

for swing- and IRS-axle

020 4230-03	Rubber stop, rear suspension, urethane, Karmann Ghia, all models, 8.59-	EUR   8.90 VAT included, plus freight cost

---

SCREWS FOR BEARING CAP, REAR AXLE

020 4020-08	Screws for bearing cap, rear axle, M10x35mm, for all Karmann Ghia, set = 4 pieces	EUR   4.80 VAT included, plus freight cost

---

SCREWS FOR TORSION BAR COVERS

020 0701-10	Screw for torsion bar covers, M10x38, for dual spring plate 1302 + automatic, set = 4 pieces	EUR   11.00 VAT included, plus freight cost

---

STEERING TUBE FLANGES

020 4300-07	Steering tube flanges, upper and lower, Karmann Ghia, set	EUR   39.00 VAT included, plus freight cost

---

WHEEL BEARING KIT, FRONT, COMPLETE

each side

020 4011-2	Wheel bearing kit, front, complete, 8.65-4.68	EUR   31.00 VAT included, plus freight cost

---

WHEEL BEARING KIT, FRONT, COMPLETE

1 kit is for 1 wheel.

020 4011-2	Wheel bearing kit, front, complete, 8.65-4.68	EUR   31.00 VAT included, plus freight cost
020 4011	Wheel bearing kit, front, complete, 4.68-	EUR   23.00 VAT included, plus freight cost
020 4013	Wheel bearing kit, front, complete, -7.65	EUR   44.80 VAT included, plus freight cost

---

WHEEL BEARING KIT, REAR, COMPLETE

1 kit is for 1 wheel.

020 4018	Radlagersatz, hinten, komplett, alle Modelle, Schräglenkerachse	EUR   36.50 VAT included, plus freight cost
020 4019	Radlagersatz, hinten, komplett, alle Modelle, Pendelachse	EUR   17.50 VAT included, plus freight cost

---

SPRING NUT FOR WHEEL BEARING

With screw

020 4012-01	Spring nut for wheel bearing, left, 8.65-	EUR   11.50 VAT included, plus freight cost
020 4012-02	Spring nut for wheel bearing, right, 8.65-	EUR   11.50 VAT included, plus freight cost

---

THRUST WASHER FOR FRONT AXLE WHEEL BEARING

020 4014-05	Thrust washer, front axle wheel bearing, -7.65	EUR   1.40 VAT included, plus freight cost

---

SHAFT SEAL FOR FRONT WHEEL BEARING

020 4013-05	Shaft seal for front wheel bearing, 12.47-7.65	EUR   2.50 VAT included, plus freight cost
020 4011-4	Shaft seal for front wheel bearing, 8.67-	EUR   2.50 EUR   2.00 VAT included, plus freight cost

---

SHAFT SEAL / SPACER RING REAR WHEEL BEARING

020 4019-06	(1) Shaft seal for rear wheel bearing, inner, 4.67-	EUR   3.30 VAT included, plus freight cost
020 4019-03	(2) Spacer ring, for rear wheel bearing, outer, swing axle, .57-	EUR   9.50 VAT included, plus freight cost

---

FIXING CLAMPS FOR STABILIZER

Fixing clamps and mouting kit for stabilizer, fits for ball joint and link pin axle beams.

020 0984	Clamps for sway bar, stainless steel, set=4 pieces for standard- and urethane bearings	EUR   36.00 VAT included, plus freight cost
020 0989	Mounting kit for standard stabilizer, stainless steel / urethan, kit for 1 stabilizier	EUR   47.00 VAT included, plus freight cost

---

STABILIZER, FRONT

010 2562	Stabilizer, front, standard, 8.65-	EUR   29.00 VAT included, plus freight cost

---

SWAY BAR, REAR, SWING AXLE

To mount this sway bar it is necessary  to drill each 2 holes into the frame yoke, to mount the rubber mounts with clamps. The push rods are mounted to the lower shock absorber screws.

010 2555-10	Sway bar, rear, swing axle, 19 mm, Karmann Ghia	EUR   105.00 VAT included, plus freight cost

---

SWAY BAR, REAR, IRS

Easy to mount.
Fixation at torsion bar tube with urethane bearings and clamps. The push rods are mounted at the torsion bar plates.

010 2555-12	Sway bar, rear, IRS, 19 mm, Karmann Ghia	EUR   105.00 VAT included, plus freight cost

---

COMPENSATING SPRING, SWING AXLE

Supported in urethane bearings it is mounted at the gearbox housing. The compensating springs avoids the hopping and the "bonanza effect" of the rear axle (knock knees)

010 2555-14	Compensating spring, swing axle, Karmann Ghia	EUR   145.00 VAT included, plus freight cost

---

GREASING NIPPLE M8x1, 0°

For front axle Karmann Ghia from 8.60 on need of 4 pieces. 
For steering knuckles Karmann Ghia 8.60-7.65 need of  2 pieces.

020 2517-06	Greasing nipple M8x1, 0°, piece	EUR   1.30 VAT included, plus freight cost

---

DRIVE SHAFT

010 2595	Drive shaft, beetle 1302/1303 + automatic all models	EUR   99.90 VAT included, plus freight cost

---

AXLE BOOT, STANDARD, SWING AXLE

Does only fit rear swing axle, comes with hardware and hose clamps. Can be mounted without dismounting of real-axle tubes. 
Mounting instruction: Centre axle boot in the way that the dividing seam shows horizontal to the back.

010 2570	Axle boot, standard, swing axle, Karmann Ghia, piece (comes with hardware and hose clamps)	EUR   6.80 VAT included, plus freight cost
020 0500-08	Hose clamp, 40-60 mm	EUR   2.40 VAT included, plus freight cost
020 0500-10	Hose clamp, 80-100 mm	EUR   2.90 VAT included, plus freight cost

---

AXLE BOOT, STANDARD, SWING AXLE, ORIGINAL PART

This axle boot can only be mounted when rear-axle tube is dismounted.

010 2570-01	Axle boot, standard, swing axle, original part, comes with clamps, piece	EUR   11.00 VAT included, plus freight cost
020 0500-08	Hose clamp, 40-60 mm	EUR   2.40 VAT included, plus freight cost
020 0500-10	Hose clamp, 80-100 mm	EUR   2.90 VAT included, plus freight cost

---

AXLE BOOTS

Made of strong copolymer coloured vinyl especially resistant against stone impact, oil, grease, fuel and heat. Can be mounted WITHOUT dismounting the rear-axle tubes but they are difficult too seal up. Comes as kit including hardware and hose clamps.

010 2350	Axle boot kit, swing axle, Karmann Ghia, red	EUR   15.50 VAT included, plus freight cost
010 2351	Axle boot kit, swing axle, Karmann Ghia, blue	EUR   15.50 VAT included, plus freight cost
010 2352	Axle boot kit, swing axle, Karmann Ghia, yellow	EUR   15.50 VAT included, plus freight cost
020 0500-08	Hose clamp, 40-60 mm	EUR   2.40 VAT included, plus freight cost
020 0500-10	Hose clamp, 80-100 mm	EUR   2.90 VAT included, plus freight cost

---

Hoffmann Speedster Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen Tel: +49 / 21 62 / 93 26 15 Fax: +49 / 21 62 / 3 36 48 e-mail: info@hoffmann-speedster.com