Informations - All about us - How to order All about us ***NEW*** First-aid box, nostalgia collection part no. 021 0125 Items for type 181 Door sill, inner, left or right, piece part no. 080 1000-01 and 080 1000-02 Door sill, outer, left or right, piece part no. 080 1003-01 and 080 1003-02 TOP-News Distributor "BOSCH- Reproduction type 009" part no. 010 0900-02 Front window and rear window, clear, for Bus T1 part no. 089 0004 Headlight, asymetrical, Bus T1 part no. 086 2111

Tools

---

CLUTCH ALIGNMENT TOOL

027 0500	Clutch alignment tool, Bus T1, -7.67 Bus T2, 1.6, 8.67-7.79 Bus T3, 1.6, 5.79-12.82	EUR   3.90 VAT included, plus freight cost

---

FLY WHEEL LOCK

027 0510	Fly wheel lock	EUR   9.50 VAT included, plus freight cost

---

ENGINE HOLDER

This air cooled engine holder can be mount at your bench. Swivel sphere: 360°

027 0550	Engine holder	EUR   38.50 VAT included, plus freight cost

---

ENGINE STAND, UNIVERSAL

Very stable quality, universal engine attachment.

027 0581	Engine stand, universal (delivery without engine)	EUR   69.00 VAT included, plus freight cost

---

ENGINE TROLLEY

027 0590	Engine trolley	EUR   39.00 VAT included, plus freight cost

---

PULLER FOR OIL PRESSURE PLUNGER

027 0577	Puller for oil pressure regulation plunger	EUR   49.00 VAT included, plus freight cost

---

DISTRIBUTOR DRIVE PULLER

Easily removes distributor drive dog.

027 0515	Distributor drive puller	EUR   49.90 VAT included, plus freight cost

---

PISTON RING COMPRESSOR

027 0520	Piston ring compressor, 83-87 mm	EUR   6.90 VAT included, plus freight cost
027 0525	Piston ring compressor, 88-94 mm	EUR   6.90 VAT included, plus freight cost

---

CLUTCH ADJUSTING WRENCH

Makes clutch adjusting a cinch.

027 0530	Clutch adjusting wrench	EUR   9.90 VAT included, plus freight cost

---

DECK HEIGHT MEASURING TOOL

027 0567	Deck height measuring tool	EUR   49.00 VAT included, plus freight cost

---

AXLE NUT TOOL

Remove rear axle nuts with this tool and your 1/2" breaker bar.

027 0535	Axle nut tool (36 mm)	EUR   12.70 VAT included, plus freight cost
027 0536	Axle nut tool (46 mm)	EUR   12.70 VAT included, plus freight cost

---

DRIVE SOCKET, 36 MM, 1/2" DRIVE

For rear brake drums, type 1 fly wheels, cooling fan

027 0533	Drive socket, 36 mm, 1/2" drive	EUR   9.80 VAT included, plus freight cost

---

PUSH ROD, ADJUSTABLE

to determine simply the necessary length of a push rod.

027 0527	Push rod, adjustable	EUR   19.00 VAT included, plus freight cost

---

BRAKE BLEEDER

027 0537	Brake bleeder	EUR   18.70 VAT included, plus freight cost

---

VALVE LIFTER RETAINING CLIPS

Holds lifter in place during engine assembly.

027 0528	Valve lifter retaining clips, pair	EUR   9.80 VAT included, plus freight cost

---

CARBURETOR SYNCHRONIZER

Easy to use air gauge allows for accurate synchronization of dual carburetors.

027 0545	Carburetor synchronizer	EUR   44.50 VAT included, plus freight cost

---

INSTALLATION TOOL FOR MOULDING

027 0549	Installation tool for moulding (plastic)	EUR   5.50 VAT included, plus freight cost

---

FLYWHEEL DOWEL PIN FIXTURE

Provides perfect positioning for drilling extra dowel pin holes in crank & flywheel for 8-dowel pin installation.

027 0483	Flywheel dowel pin fixture	EUR   39.00 VAT included, plus freight cost

---

VALVE GUIDE DRILL

Removes 8mm valve stem guides.

027 0486	Valve guide drill, 8mm	EUR   47.50 VAT included, plus freight cost

---

IN-CAR VALVE SPRING COMPRESSOR

Removes valve springs without cylinder head removal. Requires minimal air pressure.

027 0489	Valve spring removal tool	EUR   99.90 VAT included, plus freight cost

---

BENCH MOUNT HEAD ASSEMBLY TOOL

Bench model for easy removal of valve springs.

027 0492	Bench mount head assembly tool	EUR   48.00 VAT included, plus freight cost

---

SPARK PLUG THREAD REPAIR INSERT

027 0570	Tap & Reamer tool	EUR   68.50 VAT included, plus freight cost
027 0575	Spark plug inserts, pair	EUR   4.30 VAT included, plus freight cost

---

ON BOARD TOOL SET

Original set from Mexico beetle.

027 0753	On board tool set, 4 pieces	EUR   29.90 VAT included, plus freight cost

---

ON BOARD TOOL SET

This on board tool set correspond to the original tooling which was delivered with each car up to the end of the nineteen-sixties.

027 0756	On board tool set, 8-pieces	EUR   48.00 VAT included, plus freight cost

---

MEASURING PLATE FOR CRANK SHAFT

027 0560	Measuring plate for crank shaft	EUR   8.30 VAT included, plus freight cost

---

MEASURING PLATE FOR CRANK CASE BORE

027 0564	Measuring plate for crank case bore	EUR   9.90 VAT included, plus freight cost

---

END-PLAY  MEASURING TOOL

Accurately measure crankshaft end play

027 0546	End-play measuring tool	EUR   28.00 VAT included, plus freight cost

---

CRANK PULLEY PULLING AID TOOL

Helps to remove crankshaft pulley

027 0540	Crank pulley pulling aid tool	EUR   43.50 VAT included, plus freight cost

---

OIL PUMP PULLER

027 0538	Oil pump puller	EUR   8.00 VAT included, plus freight cost

---

OIL FILLER NUT TOOL

Easily remove or install oil filler.

027 0543	Oil filler nut tool	EUR   13.80 VAT included, plus freight cost

---

JACK, STANDARD

027 0760	Jack, standard, Mexico	EUR   39.00 VAT included, plus freight cost

---

JACK, VW BUS

027 0765	Jack, standard, Bus T2, 8.67-7.79 and Bus T3, 5.79-7.92	EUR   34.00 VAT included, plus freight cost

---

HYDRAULIC LIFTING JACK

Solid workshop quality with 2 flexible wheels. Measurement: about  520 x 220 x 148 mm, weight: 13,2 kg.

Load capacity: 2 tons, TÜV-tested

027 0030	Hydraulic lifting jack	EUR   19.90 VAT included, plus freight cost

---

HYDRAULIC LIFTING JACK WITH SAFETY VALVE

Load capacity: 2 tons, TÜV-tested /  weight: about 3 kg
Lifiting height: 120 mm, max: 296 mm

027 0050	Hydraulic lifting jack for 2 tons	EUR   17.90 VAT included, plus freight cost

---

UNDERFRAMES

Solid quality, 4-times adjustable, load capacity: 2 tons, TÜV-tested, height: about 280 mm / max: 385 mm, weight: 1.6 kg

027 0090	Underframe, piece	EUR   12.70 VAT included, plus freight cost

---

PRESS-IN PLATE FOR FLYWHEEL OIL SEAL

027 0542	Press-in plate for flywheel oil seal, type 1	EUR   17.50 VAT included, plus freight cost

---

JET REAMER KIT

Measures	0.5 / 0.6 / 0.7 / 0.8
	0.9 / 1.0 / 1.1 / 1.2
	1.4 / 1.6 / 1.8 / 2.0

Practical for carburetor setting or carburetor overhauling.

027 0544	Jet reamer kit, 12-pieces	EUR   23.90 VAT included, plus freight cost

---

TOOL BOX FOR SPARE WHEEL

This tool box can be placed into the wheel but it does only fit 5-hole-wheels.

027 0553	Tool box (reproduction) for spare wheel	EUR   119.00 VAT included, plus freight cost

---

ACCESSORIES FOR TOOL BOX

027 0556	Wheel crank for tool box 027 0553	EUR   23.50 VAT included, plus freight cost
027 0557	Ring key 36/21, for tool box 027 0553	EUR   19.50 VAT included, plus freight cost

---

TOOL BOX "EMPI" FOR SPARE WHEEL, WITH TOOLS

Content: 1 universal pliers, 1 water-pump pliers, 3 screwdrivers, 1 wheel wrench, 1 open-end / box wrench, 13+14, 1 open-end wrench 7+8 / 10+12, 1 box wrench 21/36, 1 spark-plug wrench
This tool box can be placed into the wheel but it does only fit 5-hole-wheels.

027 0551	Tool box "EMPI" for spare wheel	EUR   198.00 VAT included, plus freight cost

---

C.V. JOINT BOLT SOCKET

For 12-Point Hex Socket, 8mm 3/8" drive

027 0481	C.V. joint 12-point hex socket, 8mm, 3/8" drive	EUR   7.50 VAT included, plus freight cost

---

WHEEL NUT WRENCH

027 0675	Wheel nut wrench	EUR   9.90 VAT included, plus freight cost

---

4-WAY LUG METRIC WRENCH

Fits most metric lug nuts and bolts.

027 0660	4-way lug metric wrench	EUR   4.90 VAT included, plus freight cost

---

CRANKSHAFT GEAR PULLER

027 0518	Crankshaft gear puller	EUR   115.00 VAT included, plus freight cost

---

WORKSHOP HAND LAMP

Rubust, impact-resistant, dust- and splash-protected hand lamp. 220 V / 8 W, with 5m resistance cable.

027 0630	Workshop hand lamp	EUR   12.50 VAT included, plus freight cost

---

CAR TEST LAMP

Workshop type made of brass with screwable protecting cap, thin test pin and cable with alligator clip fur use on 6-24 Volt.

027 0640	Car test lamp	EUR   4.90 VAT included, plus freight cost

---

CALIBER

Precision model, nickel-plated.

027 0610	Caliber	EUR   6.50 VAT included, plus freight cost

---

WHEEL PAINTING COVER

027 0805	Wheel painting cover	EUR   6.50 VAT included, plus freight cost

---

Hoffmann Speedster Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen Tel: +49 / 21 62 / 93 26 15 Fax: +49 / 21 62 / 3 36 48 e-mail: info@hoffmann-speedster.com