Oil System Components (page 2)

ONLINE-CATALOG
for Beetle

Add-on parts - metal sheet
Body parts
Fenders

Add-on parts - GFK
Fenders
Fiber glass parts

Engine
  Air filters
  Carburetors
  Clutch
  Engine components
  Engine accessories
  Gearbox
  Oil system
  components

Exhaust
Exhaust systems
& accessories

Electrical section
  Lighting system
  Electrical parts
  Ignition

Interior accessories
  Carpet kits
  Seats
  Seat upholstery
  Seat padding
  Security belts
  Various things
  VDO-Instruments

Exterior accessories
  Convertible tops &
  accessories
  Door handles
  Glazing &
  accessories
  Locks
  Various things
  Wheels &
  accessories
  Wipers &
  accessories

Suspension parts
  Axles
  Shock absorbers
  Various things

Brake
Brake system
& accessories

Rubber parts
  Door & window
  rubber
  Various seals

Items for Type 181
(thing)
Various things

... and finally
  Gifts
  Model cars
  Tools

- Informations -
All about us

How to order
All about us
Colour chart

Item of the month

T-shirt ,
"Ultima Edicion",
light blue, L

~~29,90 EUR~~
22,00 EUR
part no. 021 0141-02

***NEW***

First-aid box,
nostalgia collection
part no. 021 0125

Items for type 181

Door sill, inner,
left or right, piece
part no. 080 1000-01 and
080 1000-02

Door sill, outer,
left or right, piece
part no. 080 1003-01 and
080 1003-02

** NEW ** NEW **

Wiper arms,
with bracket, left
or right, chromed
8.67 - 7.72
part no. 020 4771-05
to 020 4782-05

Base Cap "Última
Edición", beige
part no. 021 0143-01

Clutch pressure plate,
200 mm, up to 7.70
part no. 020 4515

Gasket set,
oil sump plate,
Made in GERMANY
part no. 020 0450-03

Accessories
"76-Edition"

Again available!

Oil filler cap, tall,
chrome, for standard
oil filler tube
part no. 010 1223

Oil System Components

page 1 I page 2

OIL PRESSURE REGULATOR, ADJUSTABLE

Allows you to adjust your oil pressure to your specs with the twist of a screw. Just screw into rear pressure galley to replace standard bottom plug.


010 0730	Oil pressure regulator, adjustable	EUR 11.00 VAT included, plus freight cost

OIL PRESSURE REGULATION PLUNGER

Fit for crank case with 1 oil pressure regulation plunger with longer plunger and reinforced spring. For motor type 1.


010 0734	Oil pressure regulation plunger, type 1, -.69, single	EUR 3.80 VAT included, plus freight cost

Fit for crank case with 2 oil pressure regulation plungers with longer plunger and reinforced spring. For motor type 1.


010 0737	Oil pressure regulation plunger, type 1, .69-, dual	EUR 6.30 VAT included, plus freight cost

SCREW PLUG, OIL PRESSURE REGUALTION


010 0739	Screw plug for oil pressure regulation plunger, M18x1.5, for type 1 engines 34Ps-50PS	EUR 5.70 VAT included, plus freight cost

OIL BLOCK OFF PLATE

Used to replace standard oil cooler when using dry sump system.


010 1240	Oil cooler block off plate, alu, cast, with seal and screws	EUR 21.90 VAT included, plus freight cost

OIL COOLER BLOCK OFF PLATE


010 1245	Oil cooler block off plate, type 1, alu, milled, for motor type 1, with seal and screws	EUR 34.00 VAT included, plus freight cost

010 1245-05	Oil cooler block off plate, type 4, milled, for motor type 4, with seal and screws	EUR 34.00 VAT included, plus freight cost

OIL COOLER CONNECTIONS, FOR EXTERNAL OIL COOLER

Made of strong aluminium, comes with mounting material.
Connection thread: M18 x 1.5

For motor type 4.


010 1246-02	Oil cooler connection, type 4, for external oil cooler, 20 mm thick	EUR 29.50 VAT included, plus freight cost

010 1246-04	Oil cooler connection, type 4, for external oil cooler, 25 mm thick	EUR 29.50 VAT included, plus freight cost

For motor type 1.


010 1246-06	Oil cooler connection, type 1, for external oil cooler, 20 mm thick	EUR 29.50 VAT included, plus freight cost

LOCK CAP TYPE 3

Cap to lock the opening of the oil filler tube in type 1- and type 2-crank cases. Comes with seal.


010 1234	Lock cap type 3, for oil filler tube	EUR 4.50 VAT included, plus freight cost

OIL DIP STICK ADAPTER TYPE 3

With this adapter you case use type 3-crank case without tube for oil dip stick in beetle or bus.


010 1230	Oil dip stick adapter type 3	EUR 12.90 VAT included, plus freight cost

OIL COOLER BY-PASS KIT

Allows complete remove and bypass of standard oil cooler and installation of an external oil cooler kit.


010 0725	Oil cooler by-pass kit	EUR 19.00 VAT included, plus freight cost

010 1023	Gasket for oil cooler (Replacement gasket for 010 0725, also fits for standard oil cooler)	EUR 2.40 VAT included, plus freight cost

OIL COOLER SEAL (CYLINDRICAL)


010 1023-05	Oil cooler seal (cylindrical), for standard oil cooler, beetle, 1.2-1.5, -7.69	EUR 1.20 VAT included, plus freight cost

OIL FILTER SUPPORT

On this support you can connect 2 oil filters (e.g. 010 0712 oder 010 0712-05). Please order the filters seperately.


010 0728	Oil filter support for 2 filters (without filters)	EUR 75.00 VAT included, plus freight cost

OIL FILTER SUPPORT WITH FILTER

Mounts a standard spin-on oil fIlter in the location of your choice.Suitable to be used in combination with additional oil cooler kits.


010 0727	Oil filter support incl. filter	EUR 26.00 VAT included, plus freight cost

SPIN-ON OIL FILTER CARTRIDGE, STANDARD

Replacement spin-on oil filter cartridge for oil pumps "Maxi" 010 0710 / 010 0711, for oil pump 30 mm VW Mexico 010 0711-7 or for oil filter support 010 0727.


010 0712	Spin-on oil filter cartridge, standard, piece	EUR 6.50 VAT included, plus freight cost

010 0712-05	Spin-on oil filter cartridge, chromed, piece	EUR 8.90 VAT included, plus freight cost

OIL COOLER, ALUMINIUM

This leightweight construction aluminium oil cooler are a must for any powered engine. According to the size the oil temperature can be reduced up to 20 - 30°C.

Connection: inner thread M18 x 1.5


020 0477	Oil cooler, aluminium, up to 1200 ccm, 90 x 330 x 50	EUR 105.00 VAT included, plus freight cost

020 0478	Oil cooler, aluminium, up to 2300 ccm, 115 x 330 x 50	EUR 115.00 VAT included, plus freight cost

020 0479	Oil cooler, aluminium, up to 3500 ccm, 140 x 330 x 50	EUR 133.00 VAT included, plus freight cost

OIL COOLER, STANDARD


020 0447	Oil cooler, standard, -7.70 and all 1200 ccm engines	EUR 75.00 VAT included, plus freight cost

020 0448	Oil cooler, standard, 8.70-, (for "Doghouse" fan shroud)	EUR 75.00 VAT included, plus freight cost

OIL COOLER KIT

This simple version is mounted on the fan shroud. For powered engines only partly suitable.

The kit contains:

1 oil cooler
1 adapter
1 oil filter
and connections, clamps and 1.5 metre hoil hose


010 0745	Oil-cooler kit	EUR 109.00 VAT included, plus freight cost

OIL COOLER ADAPTER


020 1112	Oil cooler adapter	EUR 33.50 VAT included, plus freight cost

OIL COOLER, SPECIAL

Heavy, hand welded model to install under front bumper. Connection lateral with inner thread M18 x 1.5.

Comes with solid protection grille.


020 0473	Oil cooler, special, 97 x 72 x 360 mm	EUR 224.00 VAT included, plus freight cost

020 0474	Oil cooler, special, 97 x 72 x 460 mm	EUR 269.00 VAT included, plus freight cost

020 0475	Oil cooler, special, 97 x 72 x 520 mm	EUR 279.00 VAT included, plus freight cost

020 0476	Oil cooler, special, 97 x 72 x 680 mm	EUR 319.00 VAT included, plus freight cost

TIP:
For 1302 / 1303 mount oil cooler
behind louvered front appron
part-no.: 050 2000 !!!

OIL COOLER HOLDER

Universal stamped holder for oil cooler.


020 0507	Oil cooler holder, piece	EUR 3.50 VAT included, plus freight cost

OIL COOLER KIT, MAIN SYSTEM

This oil cooler kit is special composed for bettle and is available in 2 models. Connection: 1/2" = 13 mm inner thread.

1) with ready mounted high pressure oil hose
2) with ready mounted high pressure oil hose special, which is supplementary coated with a galvanized steel weave to be mounted on high scrub- or temperature endangered points.

In this main system oil cooler kit a by-pass with inlet and outlet connector gets mounted to the oil cooler instead of the standard cooler. Because of that the oil cooler is full integrated into the oil system and oil cooling with same oil cooler size is higher than in the minor system oil cooler kit. Only possible to install if the engine is removed because it is necessary to make a cut out into the backwall of the fan shroud.

For front mounting as main system kit with by-pass from standard oil cooler connector.


020 0470	Oil-cooler kit, main system, special hose	EUR 189.90 VAT included, plus freight cost
020 0468	Oil-cooler kit, main system, standard hose	EUR 139.00 VAT included, plus freight cost

OIL HOSE HIGH PRESSURE

This high pressure oil hose has a diameter of 1/2" = 13 mm inner thread. It is pressure tested and temperature resistant. Comes as yard goods.


010 0729	High pressure oil hose, per metre	EUR 12.50 VAT included, plus freight cost

OIL HOSE HIGH PRESSURE, SPECIAL

This special oil hose corresponds with high pressure oil hose 010 0729. Supplementary it is coated with a galvanized steel weave. Special to mount on high scrub- and temperature endangered points. Comes as yard goods.


020 0490	High pressure oil hose, special, per metre	EUR 15.50 VAT included, plus freight cost

HOSE CLAMPS

extra strong, galvanized


020 0492	Hose clamp, 8-16 mm	EUR 1.60 VAT included, plus freight cost

020 0494	Hose clamp, 12-20 mm	EUR 1.60 VAT included, plus freight cost

020 0496	Hose clamp, 16-25 mm	EUR 1.60 VAT included, plus freight cost

020 0498	Hose clamp, 25-40 mm	EUR 1.60 VAT included, plus freight cost

Hose clamp 020 0500-04 fits for
020 2575 Fold sleeve (you need 1 piece)
020 0010 Manifold boot for air intake (you need 1 piece)


020 0500-04	Hose clamp, 35-50 mm	EUR 1.80 VAT included, plus freight cost

Hose clamp 020 0500-08 fits for
010 2350          Axle boot (you need 1 piece)
010 2351          Axle boot (you need 1 piece)
010 2352          Axle boot (you need 1 piece)
010 2570          Axle boot (you need 1 piece)
010 2570-01    Axle boot (you need 1 piece)
020 0010          Manifold boot for air intake (you need 1 piece)
020 2575          Fold sleeve (you need 1 piece)


020 0500-08	Hose clamp, 40-60 mm	EUR 2.40 VAT included, plus freight cost

Hose clamp 020 0500-10 fits for
010 2350          Axle boot (you need 1 piece)
010 2351          Axle boot (you need 1 piece)
010 2352          Axle boot (you need 1 piece)
010 2570          Axle boot (you need 1 piece)
010 2570-01    Axle boot (you need 1 piece)


020 0500-10	Hose clamp, 80-100 mm	EUR 2.90 VAT included, plus freight cost

HOSE CLAMP

rubber coated to fix hoses or tubes


020 0502	Hose clamp, rubber coated, 16-25 mm	EUR 1.70 VAT included, plus freight cost

020 0504	Hose clamp, rubber coated, 25-40 mm	EUR 1.70 VAT included, plus freight cost

HOSE CLAMPS "SPECIAL"

These special hose clamps stop frayed out hose ends on standard and metal coated hoses. Available in 5 different sizes in aluminium blue-anodized, red-anodized or chromed.

Aluminium, blue-anodized


010 0770-1	Hose clamp "special", blue-anodized, 10-12 mm	EUR 3.60 VAT included, plus freight cost

010 0770-2	Hose clamp "special", blue-anodized, 13-16 mm	EUR 3.70 VAT included, plus freight cost

010 0770-3	Hose clamp "special", blue-anodized, 16-18 mm	EUR 3.80 VAT included, plus freight cost

010 0770-4	Hose clamp "special", blue-anodized, 18-21 mm	EUR 4.90 VAT included, plus freight cost

010 0770-5	Hose clamp "special", blue-anodized, 21-25 mm	EUR 5.40 VAT included, plus freight cost

Aluminium, red-anodized


010 0773-1	Hose clamp "special", red-anodized, 10-12 mm	EUR 3.60 VAT included, plus freight cost

010 0773-2	Hose clamp "special", red-anodized, 13-16 mm	EUR 3.70 VAT included, plus freight cost

010 0773-3	Hose clamp "special", red-anodized, 16-18 mm	EUR 3.80 VAT included, plus freight cost

010 0773-4	Hose clamp "special", red-anodized, 18-21 mm	EUR 4.90 VAT included, plus freight cost

010 0773-5	Hose clamp "special", red-anodized, 21-25 mm	EUR 5.40 VAT included, plus freight cost

Aluminium, chromed


010 0776-1	Hose clamp "special", chromed, 10-12 mm	EUR 3.60 VAT included, plus freight cost

010 0776-2	Hose clamp "special", chromed, 13-16 mm	EUR 3.70 VAT included, plus freight cost

010 0776-3	Hose clamp "special", chromed, 16-18 mm	EUR 3.80 VAT included, plus freight cost

010 0776-4	Hose clamp "special", chromed, 18-21 mm	EUR 4.90 VAT included, plus freight cost

010 0776-5	Hose clamp "special", chromed, 21-25 mm	EUR 5.40 VAT included, plus freight cost

TIP: Do not forget
hose clamps !!!

OIL HOSE MOUNTING KIT I

This mounting kit includs: 2 double connecting pieces M16/M18, 2 nipples M18, 2 fling on nuts, 2 hose clamps and 2 copper seals. This kit is special recommended to mount oil pumps 010 0713 and 010 0714.


010 0752	Oil hose mounting kit I	EUR 12.70 VAT included, plus freight cost

OIL HOSE MOUNTING KIT II

This kit includs seals and clamps and also 2 ring eyes for 1/2" hose and 2 cavity nuts M16 and is also suitable for hose mounting on oil thermostats when using MAXI-oil pumps with filter.


010 0753	Oil hose mounting kit II	EUR 12.70 VAT included, plus freight cost

OIL THERMOSTAT

To avoid long temperature run ups with external oil cooler systems this exact working thermostat switches the external oil cooler system at 75° C This thermostat can be installed without problems at any position in the hoseline.


020 0750	Oil thermostat (hoseline)	EUR 39.50 VAT included, plus freight cost

OIL THERMOSTAT ADAPTER

To be used in conjunction with oil pumps "Maxi" (part-no.: 010 0710 and 010 0711) for temperature controled connection of oil coolers.


010 0751	Oil thermostat adapter	EUR 76.00 VAT included, plus freight cost

DOUBLE CONNECTING PIECES


020 0431	Double connecting piece, M18/M18	EUR 3.70 VAT included, plus freight cost

020 0430	Double connecting piece, M18/M16	EUR 3.90 VAT included, plus freight cost

HOSE CONNECTORS

for 1/2" hose


020 0432	Hose connector for 1/2" hose	EUR 3.60 VAT included, plus freight cost

COPPER SEALS


020 0435	Copper seal, M14	EUR 0.70 VAT included, plus freight cost

020 0436	Copper seal, M16	EUR 0.70 VAT included, plus freight cost

020 0437	Copper seal, M18	EUR 0.70 VAT included, plus freight cost

020 0438	Copper seal, M22	EUR 0.70 VAT included, plus freight cost

RUBBER SEALS


020 0440	Rubber seal, M14	EUR 0.75 VAT included, plus freight cost

020 0442	Rubber seal, M16	EUR 0.75 VAT included, plus freight cost

020 0444	Rubber seal, M18	EUR 0.80 VAT included, plus freight cost

TUBE BENDS

for 1/2" hose


020 0405	Tube bend, inner thread 1/2"	EUR 5.60 VAT included, plus freight cost

020 0407	Tube bend, inner thread M18	EUR 4.80 VAT included, plus freight cost

RING EYES

for 1/2" hose


020 0412	Ring eye, inner thread M18	EUR 5.10 VAT included, plus freight cost

020 0414	Ring eye, inner thread M16	EUR 4.80 VAT included, plus freight cost

FLING ON NUT AND NIPPLE


020 0417	Fling on nut and nipple for inner thread M18	EUR 3.90 VAT included, plus freight cost

020 0419	Fling on nut and nipple for inner thread M16	EUR 3.90 VAT included, plus freight cost

020 0421	Fling on nut and nipple for inner thread 1/2"	EUR 4.10 VAT included, plus freight cost

CAVITY SCREW


020 0426	Cavity screw for outer thread M16	EUR 3.70 VAT included, plus freight cost

020 0428	Cavity screw for outer thread M18	EUR 3.60 VAT included, plus freight cost

page 1 I page 2

Hoffmann Speedster Teile Vertriebs GmbH
Gerberstr. 138-142
D - 41748 Viersen
Tel: +49 / 21 62 / 93 26 15
Fax: +49 / 21 62 / 3 36 48
e-mail: info@hoffmann-speedster.com

	Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 15 Fax +49 / 21 62 / 3 36 48			catalog	How to order	Search
	Beetle		Golf & Co.	Bus T1, T2 + T3	Karmann Ghia	Porsche