![]() |
Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 15 Fax +49 / 21 62 / 3 36 48 |
|||||
|
Beetle |
||||||
NEWS - Last Minute
CABLE TREE
Cable tree from dashboard up to engine, only for Última Edición-Beetle with immobilizer system.
|
|||
| 020 0057-10 | Cable tree, Mexico beetle 1600i, 8.03- | EUR 85.00
|
|
COOLING-WATER TEMPERATUR SENSOR WITH MOUNTING KIT
The T-piece with the attachment for the temperatur sensor is mounted between the radiator hoses with 2 clamps. Kit can be used for radiator hoses from 28-35 mm
Kit contains: temperatur sensor, T-piece, cable and 2x clamp
|
|||
| 021 0285 | Cooling-water temperature sensor with mounting kit | EUR 59.90
|
|
SCREW KIT FOR OUTSIDE SCRAPERS
|
|||
| 020 4930-05 | Screw kit for outside scrapers (10 pieces), beetle convertible, 8.65- | EUR 1.80
|
|
DOOR PANELS
With pocket on the left side and opening for ashtray rear, right.
Colour: bicoloured dark grey / light grey. Set of 4 pieces
|
|||
| 020 0022 | Door panels, bicoloured, beetle sedan, 8.55-7.64 | EUR 89.00
|
|
SELF-CUTTING CONNECTIONS, BLUE
Comes 10 pieces packed. Fit for 1-2.5 mm2 cable.
Self-cutting connections in blue you can find here -->
|
|||
| 020 0836-04 | Self-cutting connections, red | EUR 3.50
|
|
|
|||
| 020 0836-06 | Self-cutting connections, yellow | EUR 3.50
|
|
POLE SHOE ASSORTMENT
|
|||
| 020 0890 | Pole shoe assortment | EUR 9.90
|
|
HAZARD WARNING SWITCH
|
|||
| 190 3405 | Hazard warning switch, beetle, (Mexico), 10.90- | EUR 17.50
|
|
HEADLIGHT SWITCH
|
|||
| 190 3200 | Headlight switch, beetle (Mexico), 10.90- | EUR 17.50
|
|
BULB, H4
More bulbs you find here -->
|
|||
| 020 4415-03 | Bulb H4, 6 V, 60/55 W, with H4 base, non homologated, piece |
EUR 14.90
|
|
DOOR HANDLES, BLACK
|
|||
| 020 2463-05 | Door handles, black, same key, 8.67-, paire | EUR 35.00
|
|
HEADLIGHT RIM, PLASTIC / BLACK
PETROL COCK
|
|||
| 020 0828-06 | Petrol cock, beetle, 10.52-7.55, for 6 mm line | EUR 89.00
|
|
FUSES, ASSORTMENT
The set is composed of:
1 piece 5 A, green
5 peices 8 A, white
3 pieces 16 A, red
1 piece 25 A, blue
|
|||
| 020 0870-00 | Fuses, assortment | EUR 3.00
|
|
FUSES
Comes in set of 10 pieces.
SCREW PLUG, OIL PRESSURE REGUALTION
|
|||
| 010 0739 | Screw plug for oil pressure regulation plunger, M18x1.5, for type 1 engines 34Ps-50PS | EUR 5.70
|
|
BRAKE HOSE
DISTRIBUTOR DRIVE GEAR PINION, SPECIAL
Only for type 1 engines running with an electrical fuel
pump.
Without drive for fuel pump push rod.
|
|||
| 010 0161-04 | Distributor drive gear pinion, special, 1.2-1.6, 8.64-, 34PS | EUR 43.00
|
|
PIN, 40 MM
|
|||
| 020 4068-02 | Pin 40mm, beetle 1302/1303, front, 8.70-, piece (2 pieces each brake drum) | EUR 1.00
|
|
SHOCK ABSORBER BUSHING
|
|||
| 020 4235-07 | Shock absorber bushing, for standard shock absorbers only, beetle, .50- | EUR 3.00
|
|
WHEEL BEARING KIT, FRONT, COMPLETE
each side
|
|||
| 020 4011-2 | Wheel bearing kit, front, complete, 8.65-4.68 | EUR 31.00
|
|
SCREW FOR SHOCK ABSORBER SUPPORT, M12 x 1.5 x 80mm
|
|||
| 020 4235-11 | Screw for shock absorber support, beetle 1.59- for swing axle upper and lower, beetle 8.67- for IRS axel, upper only |
EUR 3.00
|
|
DASHBOARD, A-PILLARS
For the Mexico version from 10.90 on with the new dashboard. Can also be used for older beetle.
|
|||
| 050 1489-10 | Dashboard, A-pillars, window frame, beetle 8.67- (except 1303) | EUR 175.00
|
|
DUAL CARBURETOR SYSTEM, EMPI / WEBER 48IDA
Dual carburetor system EMPI / WEBER 48IDA with special intake manifolds.
Type 1 remake of the ultimate "Racing carburetor" for aircooled Volkswagen, with intake trumpet and crossbar linkage and reinforced casted intake manifolds which can be practically fitted to each cylinder head shape.
This system is composed of:
2 Empi / Weber 48IDA carburetors with intake trumpet
2 special intake manifolds
1 crossbar linkage
Seals and mounting kit
|
|||
| 020 3212 | Dual carburetor system, EMPI/WEBER 48 IDA | EUR 1599.00
|
|
TWIN-CARBURETOR KIT, EMPI, SINGLE-CHANNEL
Twin-carburetor kit EMPI / Weber 34PICT mit single-channel intake
manifold.
Reproduction of the classic "TDE-system" for single-channel cylinder
heads, as all 1200,
1300 (40PS) and 1500ccm.
This kit is composed of:
2 carburetors
2 single-channel intake tubes
2 air filters
1 linkage
Mounting kit and englisch mounting instruction
|
|||
| 010 0615 | Twin-carburetor kit, EMPI, single-channel | EUR 399.00
|
|
SPACERS, BLOWER HOUSING AND CYLINDER-HEAD COVER
The spacers cover the slot which always rises between blower housing and cylinder-head cover.
|
|||
| 020 1104 | Spacer, blower housing and cylinder-head cover, 1200-1600 ccm, pair | EUR 9.50
|
|
HUB-CAP, EMPI
|
|||
| 010 3607 | Hub-cap, EMPI, beetle 8.65-7.67, for 5-lug wheel with flat hub-cap (intermediate model wheel) |
EUR 14.90
|
|
STARTER BUSHING, FOR TRANSFORMATION 6 TO 12 VOLT
This starter bushing will be needed if a 12 Volt Starter should be mounted into a 6 Volt car.
|
|||
| 020 0681-04 | Starter bushing, for transformation 6 to 12 Volt, beetle -7.66 | EUR 4.00
|
|
EXHAUST, ACCESSORY QUALITY
The connections for the heat exchangers and the tailpipes do not correspond to the original.
|
|||
| 020 3410-10 | Exhaust, 36´7-50 PS, beetle, 1.3-1.6, 8.65-, accessory quality | EUR 33.00
|
|
WIPER MOTOR, 12V, WITH LINKAGE
This wiper motor with linkage fits beetle from 8.72 on. He can
also be used from 8.67 to 7.72 together with the wiper arms 020 4791 and 020 4792.
The electric connection is designed for single cable sockets and the start- and
stop position of the wiper motor need to be adjusted.
|
|||
| 020 4755 | Wiper motor, 12 V, with linkage, 8.67- (not for 1303) |
EUR 159.00
|
|
| |
Hoffmann
Speedster Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen Tel: +49 / 21 62 / 93 26 15 Fax: +49 / 21 62 / 3 36 48 e-mail: info@hoffmann-speedster.com |