Engine components (page 1)

ONLINE-CATALOG
for Beetle

Add-on parts - metal sheet
Body parts
Fenders

Add-on parts - GFK
Fenders
Fiber glass parts

Engine
  Air filters
  Carburetors
  Clutch
  Engine components
  Engine accessories
  Gearbox
  Oil system
  components

Exhaust
Exhaust systems
& accessories

Electrical section
  Lighting system
  Electrical parts
  Ignition

Interior accessories
  Carpet kits
  Seats
  Seat upholstery
  Seat padding
  Security belts
  Various things
  VDO-Instruments

Exterior accessories
  Convertible tops &
  accessories
  Door handles
  Glazing &
  accessories
  Locks
  Various things
  Wheels &
  accessories
  Wipers &
  accessories

Suspension parts
  Axles
  Shock absorbers
  Various things

Brake
Brake system
& accessories

Rubber parts
  Door & window
  rubber
  Various seals

Items for Type 181
(thing)
Various things

... and finally
  Gifts
  Model cars
  Tools

- Informations -
All about us

How to order
All about us
Colour chart

Items for type 181

Door sill, inner,
left or right, piece
part no. 080 1000-01 and
080 1000-02

Door sill, outer,
left or right, piece
part no. 080 1003-01 and
080 1003-02

** NEW ** NEW **

Wiper arms,
with bracket, left
or right, chromed
8.67 - 7.72
part no. 020 4771-05
to 020 4782-05

Base Cap "Última
Edición", beige
part no. 021 0143-01

Clutch pressure plate,
200 mm, up to 7.70
part no. 020 4515

Gasket set,
oil sump plate,
Made in GERMANY
part no. 020 0450-03

Accessories
"76-Edition"

Again available!

Oil filler cap, tall,
chrome, for standard
oil filler tube
part no. 010 1223

Engine components

page 1 I page 2 I page 3

SHORT BLOCK ENGINE "30 PS", UNLEADED, REBUILT

This overhauled 30PS short block engine comes with oil cooler, fuel pump, flywheel for 180mm clutch and reinforced oil pump.
The enigne will be delivered with filled-in oil.
The cylinder heads have been converted for unleaded use.

For bigger pictures please click on one of the small pictures.


020-0063	Short block engine "30PS", unleaded, rebuilt	EUR 2380.00 VAT included, plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

SHORT BLOCK, STANDARD, 1600 CCM

Brand new short block from VW-production with new components as crank case, crankshaft, camshaft, piston and cylinders, cylinder heads and 200 mm flywheel 12V

stroke:	69 mm
drilling:	85,5 mm
cylinder heads:	typ 040 standard
camshaft:	standard
fly wheel:	200 mm, 12 Volt


020-0060-20	Short block, standard	EUR 2399.00 VAT included, plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

ENGINE, COMPLETE, WITH STANDARD IGNITION SYSTEM, GENERATOR

With standard ignition system (009 distributer).
Engine comes complete with fan shroud, heat exchangers and 009 distributor.
With generator.

For a bigger picture please click here -->


020-0043	Engine, complete, 1600 ccm, VW Mexico, with standard ignition system and GENERATOR	EUR 3449.00 VAT included, plus freight cost

ENGINE, COMPLETE, WITH STANDARD IGNITION SYSTEM, ALTERNATOR

With standard ignition system (009 distributer).
Engine comes complete with fan shroud, heat exchangers and 009 distributor.
With alternator.

For a bigger picture please click here -->


020-0043-01	Engine, complete, 1600 ccm, VW Mexico, with standard ignition system and ALTERNATOR	EUR 3449.00 VAT included, plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

ENGINE, COMPLETE, WITH ELECTRONIC IGNITION SYSTEM

With electronic ignition system.
Engine comes complete with fan shroud, heat exchangers and electronic ignition system. It can also be mounted into a standard beetle but then you are in additional need of an engine control unit (020 0057-01)

For bigger pictures please click on one of the small pictures.


020-0044	Engine, complete, 1600 ccm, VW Mexico, with electronic ignition system	EUR 3149.00 VAT included, plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

INJECTION ENGINE, COMPLETE

For bigger pictures please click on one of the small pictures.


020-0045	Injection engine, complete, 1600 ccm, VW Mexico, for catalytic exhaust	EUR 3790.00 VAT included, plus freight cost

HINT: For new engines it is fundamentaly
necessary to use new oil cooler!
In used oil coolers there will be
metal particles which cannot be removed.

ENGINE CONTROL UNIT "ACD"


020-0057-01	Engine control unit "ACD"	EUR 299.00 VAT included, plus freight cost

ENGINE CHANGE OVER KIT "STANDARD"

The kit contains:

2 cylinder heads, standard, cpl.

4 piston and cylinders, 85,5 x 69 mm, standard, 1600 ccm

1 engine gasket set, standard, 1300-1600 ccm

1 flywheel oil seal

1 push rod tubes, 1300-1600

1 tube gasket glue


020-0093	Engine change over kit, standard	EUR 545.00 VAT included, plus freight cost

ENGINE CHANGE OVER KIT "UNLEADED"

The kit contains:

2 cylinder heads 041, unleaded

4 piston and cylinders, 88 x 69 mm, Slip In

1 engine gasket set, standard, 1300-1600 ccm

1 flywheel oil seal

1 push rod tubes, 1300-1600
1 tube gasket glue


020-0090-01	Engine change over kit "unleaded", Slip In	EUR 698.00 VAT included, plus freight cost

ENGINE CHANGE OVER KIT "UNLEADED"

With this kit you can change over your 1300, 1500 and 1600 ccm engine to unleaded fuel. All standard parts are replaced by the new parts of the kit.

The kit contains:

4 piston and cylinders 85,5 x 69 mm

2 cylinder heads

1 set of push rod tubes

1 engine gasket set

1 tube gasket glue


020-0090	Engine change over kit, unleaded	EUR 599.00 VAT included, plus freight cost

ENGINE KIT "STREET" 1679 CCM

Engine kit to start with professional tuning.

The kit contains:

4 piston and cylinders 88 x 69 mm
1 cam OZ 268°/Lift 8,86
1 camshaft bearing set
1 "Maxi" oil pump incl. lfilter
1 engine gasket set compl.
1 tube gasket glue
1 special intake manifolds for Solex PICT carburetor


010-0060	Engine kit "Street", 1679 ccm	EUR 585.00 VAT included, plus freight cost

ENGINE KIT "STANDARD PLUS"

Engine kit complete for tuning or complete overhaul. Can be mount with simple tools and contains only brand-new parts.

The kit contains:

4 piston and cylinders 85,5 x 69 mm
2 cylinder heads, standard
1 crank shaft, standard, 69 mm, new
1 connecting rods, standard (Set)
8 valve lifters

1 main bearing set, standard

1 connecting rod bearing set, standard

1 windage push rod tubes

1 camshaft gear assembly kit without distributor drive

1 camshaft bearing set

1 fly wheel oil seal

1 engine gasket set

1 tube gasket glue


020-0095	Engine kit "Standard Plus"	EUR 995.00 VAT included, plus freight cost

ENGINE KIT "STANDARD PLUS/PLUS"

Engine kit complete for tuning or complete overhaul. Can be mount with simple tools and contains only brand-new parts.

The kit contains:

4 piston and cylinders 85,5 x 69 mm
2 cylinder heads 041, unleaded
1 crank shaft, standard, 69 mm, new
1 connecting rods, standard (Set)
8 valve lifters

1 main bearing set, standard

1 connecting rod bearing set, standard

1 windage push rod tubes

1 camshaft gear assembly kit without distributor drive

1 camshaft bearing set

1 fly wheel oil seal

1 engine gasket set

1 tube gasket glue


020-0095-07	Engine kit "Standard Plus / plus"	EUR 995.00 VAT included, plus freight cost

ENGINE KIT "NEW RACE" 1776 CCM

1.8 l engine kit special for two single carburetors.

The kit contains:

4 piston and cylinders, 90,5 x 69 mm
1 cam OZ 280° / Lift 8,64
1 "Maxi" oil pump incl. filter
1 engine gasket set
1 crank shaft 69 mm
1 hot rod set
1 main bearing set
1 connecting rod set
1 fly wheel oil seal
1 tube gasket glue


010-0070	Engine kit "New Race" 1776 ccm	EUR 839.00 VAT included, plus freight cost

WASHER, CYLINDER HEAD

Type 1, 1.2-1.6


010-1003-09	Washer for cylinder head, 10 mm, .56-	EUR 0.70 VAT included, plus freight cost

010-1003-10	Washer for cylinder head, 8 mm, .56-	EUR 0.70 VAT included, plus freight cost

FIXING NUT FOR CYLINDER HEAD

Type 1, 1.2-1.6


010-1003-12	Fixing nut for cylinder head, 10 mm, .56-	EUR 1.00 VAT included, plus freight cost

010-1003-13	Fixing nut for cylinder head, 8 mm, .56-	EUR 1.00 VAT included, plus freight cost

STUD KIT, 8 MM, SINGLE PORT HEADS

Stud kit for single port heads, fit for standard crank case. Manufactured of special steel. Comes in set of 16 pieces incl. nuts and washers.

Length: 9 pieces = 23.8 cm, 7 pieces = 20.3 cm


010-1004	Stud kit, 8mm, single port heads, 1300-1600 ccm	EUR 39.00 VAT included, plus freight cost

STUD KIT, 8 MM, DUAL PORT HEADS

Stud kit for dual port heads, fit for standard crank case. Manufactured of special steel. Comes in set of 16 pieces incl. nuts and washers.

Length: 9 pieces = 23.5 cm, 3 pieces = 19.9 cm und 4 pieces = 18.5 cm


010-1001	Stud kit, 8mm, dual port heads, 1500-1600 ccm	EUR 39.90 VAT included, plus freight cost

SELF TAPPING CASE STUDS, 10 mm

For quick repair of stripped head studs. The rolled-thread of these 10 mm studs provide maximum hold and metal chips are effectively collected by the slot or hole design (see enlargement in picture)


010-1003-03	Stud, 10 mm, 178 mm, 1200 ccm, upper, piece	EUR 6.50 VAT included, plus freight cost

010-1003-04	Stud, 10 mm, 230 mm, 1200 ccm, lower, piece	EUR 6.50 VAT included, plus freight cost

010-1003-05	Stud, 10 mm, 204 mm, 15-1600 ccm, upper, piece	EUR 6.90 VAT included, plus freight cost

010-1003-06	Stud, 10 mm, 240 mm, 1500-1600 ccm, lower, piece	EUR 6.90 VAT included, plus freight cost

CASE SAVER INSERTS

Repair stripped and worn head stud threads. Case savers provide greater hold.


010-0999	Case saver inserts, 14/10mm, pair	EUR 2.40 VAT included, plus freight cost

CRANK CASE

New standard crank case with 12 mm main oilpressure canal and 12 mm thread inserts. The casting is made of stable AS 41 alloy (4%aluminium, 1% silicium). Thus the crank case is more stable than the former cases of AS 21 alloy.


010-0003	Crank case, standard, 1300-1600	EUR 489.00 VAT included, plus freight cost

010-0003-01	Crank case, standard, original, 1300-1600	EUR 530.00 VAT included, plus freight cost

Crank cases are also available rebored.


010-0003-10	Crank case, rebored for 90.5 or 92 mm cylinders	EUR 595.00 VAT included, plus freight cost

010-0003-20	Crank case, rebored for 94 mm cylinders	EUR 595.00 VAT included, plus freight cost

CRANK CASE, ELECTRICAL FUEL PUMP, ORIGINAL

Like 010 0003-01 but without openings for fuel pump, no attach for Bus engine support (3 drillings)


010-0003-04	Crank case, eletrical fuel pump, original	EUR 575.00 VAT included, plus freight cost

CAMSHAFT END PLUG RUBBER

Should be renewed on each engine check.


010-1014	Plastic end plug rubber, camshaft	EUR 2.90 VAT included, plus freight cost

010-1014-01	Metal end plug rubber, camshaft	EUR 3.50 VAT included, plus freight cost

SCREWS FOR ENGINE MOUNT


010-0993	(1) Hammer screw engine mount, M10x110	EUR 2.80 VAT included, plus freight cost

010-0992	(2) Hexagonal screw engine mount M10x70	EUR 1.70 VAT included, plus freight cost

010-0990	(3) Pin screw engine mount M10x82	EUR 1.70 VAT included, plus freight cost

OIL SUCK IN TUBE


010-0005-03	Oil suck in tube, type 1, 14 mm	EUR 21.00 VAT included, plus freight cost

CRANK CASE REPAIR KIT

German OE-quality.


010-1005	Crank case repair kit	EUR 17.90 VAT included, plus freight cost

ENGINE HARDWARE KIT

Complete set of high quality nuts, washers, etc. for engine assembly.


020-0268	Engine hardware kit	EUR 24.80 VAT included, plus freight cost

STOP NUT SET FOR CRANK CASE TYPE 1


020-0270	Stop nut set for crank case type 1	EUR 5.50 VAT included, plus freight cost

CRANK SHAFT, STANDARD, NEW


010-0013	Stock crankshaft, standard, new	EUR 169.00 VAT included, plus freight cost

CRANK SHAFT, FORGED

Forged counter-weighted crank shaft for stock rods.


010-0009	Crank shaft, forged, 76 mm	EUR 359.00 VAT included, plus freight cost

010-0010	Crank shaft, forged, 78 mm	EUR 499.00 VAT included, plus freight cost

CRANK SHAFT RACER SPACER, CLOSED


010-0050	Crank shaft racer spacer, closed	EUR 13.50 VAT included, plus freight cost

DOWEL PINS

Manufactured of special tempered steel. Comes in set of 4 pieces.


010-0130	Dowel pins, diameter: 80mm, beetle, 1.2-1.6, 8.60-, 34PS-	EUR 6.90 VAT included, plus freight cost

DOWEL PINS FOR CRANK SHAFT / FLYWHEEL

Comes in set of 8 pieces. They are needed to repair widened pin holes.


010-0131	Dowel pins for crank shaft/flywheel, 8.7 mm (outsize), beetle, 1.2-1.6, 8.60-, 34PS-	EUR 19.90 VAT included, plus freight cost

FLYWHEEL, STANDARD

7,3 kg. Crank shaft and flywheel must always been balanced together !!


010-0110	Flywheel, 200 mm, 12 V, ring gear: 130 teeth, beetle (Mexico), 1.2, 1.80-, 34PS and 1302/1303, 1.6, 8.70-1.80, 50PS	EUR 93.00 VAT included, plus freight cost

FLYWHEEL, LIGHTENED

Lightened flywheel, 5,5 kg, 200 mm, with 8 dowel pin holes. Crank shaft and flywheel must always been balanced together !!


010-0101	Flywheel, lightened, 200 mm, 12 V, ring gear: 130 teeth, beetle (Mexico), 1.2, 1.80-, 34PS and 1302/1303, 1.6, 8.70-1.80, 50PS	EUR 93.00 VAT included, plus freight cost

ACCESSORIES FOR FLYWHEELS


010-0135	Flywheel shim, 0.24mm, beetle, 1.2-1.6, 8.60-	EUR 1.60 VAT included, plus freight cost

010-0137	Flywheel shim, 0.30mm, beetle, 1.2-1.6, 8.60-	EUR 1.80 VAT included, plus freight cost

010-0137-04	Flywheel shim, 0.32 mm, beetle, 1.2-1.6, 8.60-	EUR 1.80 VAT included, plus freight cost

010-0137-05	Flywheel shim, 0.34 mm, beetle, 1.2-1.6, 8.60-	EUR 2.20 VAT included, plus freight cost

010-1008	O-ring seal for flywheel, beetle, 1.2-1.6, 8.60-	EUR 1.50 VAT included, plus freight cost

GLAND NUT, STANDARD

Gland nut for flywheel. Necessary to renew the gland nut after each remove of the flywheel from the crankshaft.


010-0119	Gland nut, standard, beetle, -8.60	EUR 18.50 VAT included, plus freight cost

010-0122	Gland nut, standard, beetle, 1.2-1.6, 8.60-	EUR 9.90 VAT included, plus freight cost

010-0125	Lock plate gland nut, beetle, 1.2-1.6, 12.47-	EUR 1.80 VAT included, plus freight cost

NEEDLE BEARING FOR GLAND NUT / CRANKSHAFT


010-0123	Needle bearing for gland nut / crankshaft, beetle, 1.2-1.6, 8.60-	EUR 4.90 VAT included, plus freight cost

GLAND NUT, REINFORCED

Gland nut for flywheel. Necessary to renew the gland nut after each remove of the flywheel from the crankshaft.


010-0120	Gland nut, reinforced, beetle, 1.2-1.6, 8.60-	EUR 34.90 VAT included, plus freight cost

PISTON AND CYLINDERS, CAST

Comes as complete kit with:

4 pistons with wrist pins and locks
4 cylinders and
4 sets of piston rings

For 1500/1600 ccm engines you can mount piston and cylinders with 85,5 x 69 mm standard (part-no.: 010 0510), 88 x 69 mm "Slip IN" (part-no.: 010 0512) or 87 x 69 mm (part-no.: 010 0513) without further mechanical treatment of engine bloc and cylinder heads.

**For bigger piston and cylinder kits it's necessary to rebore according to the size. For repair use it is also possible to order single piston/cylinder.


010-0480	Piston and cylinder set, 77 x 64 mm, 1200 ccm, 34PS, .61-.78, bore at crank case Ø 87 mm	EUR 299.00 VAT included, plus freight cost

010-0485	Piston and cylinder set, 77 x 64 mm, 1200 ccm, 34PS, .70-, bore at crank case Ø 90 mm	EUR 299.00 VAT included, plus freight cost

010-0485-04	Piston and cylinder, 77 x 64 mm, 1200 ccm, 34 PS, .70-, single	EUR 79.00 VAT included, plus freight cost

010-0507	Piston and cylinder set, 1300 ccm, normal compression	EUR 209.00 VAT included, plus freight cost

010-0507-04	Piston and cylinder, 1300 ccm, normal compression, single	EUR 58.00 VAT included, plus freight cost

010-0504	Piston and cylinder set, 83 x 69 mm, 1500 ccm, 44/45 PS	EUR 309.00 VAT included, plus freight cost

010-0510	Piston and cylinder set, 85.5 x 69 mm, 1600 ccm, standard	EUR 159.00 VAT included, plus freight cost

010-0510-04	Piston and cylinder, 85,5 x 69 mm, 1600 ccm, standard, single	EUR 43.00 VAT included, plus freight cost

010-0513	Piston and cylinder set, 87 x 69 mm, 1640 ccm, cast	EUR 217.00 VAT included, plus freight cost

010-0513-04	Piston and cylinder, 87 x 69 mm, 1640 ccm, single	EUR 59.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, 30 PS

Comes as complete kit with:

4 pistons with wrist pins and locks
4 cylinders and
4 sets of piston rings


010-0475	Piston and cylinder set, 30 PS	EUR 410.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS "MAHLE PLUS"

85,5 x 69 mm, cast, 1584 ccm

Contents:

4 x piston and cylinders
8 push rod tubes
complete engine gasket set and flywheel oil seal
1 tube gasket glue

For a bigger picture please click here -->


010-0510-30	Piston and cylinder set "MAHLE PLUS", 85.5 x 69 mm, 1584 ccm	EUR 179.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, FORGED

These piston and cylinder can be mounted without further mechanical treatment of engine bloc and cylinder heads.


010-0512	Piston and cylinder set, 88 x 69 mm, "Slip In", 1679 ccm, for standard crank shaft, forged	EUR 279.00 VAT included, plus freight cost

010-0512-04	Piston and cylinder, 88 x 69 mm, "SLIP IN", 1679 ccm, for standard crank shaft, forged, single	EUR 73.00 VAT included, plus freight cost

010-0514	Piston and cylinder set, 87 x 69 mm, 1640 ccm, forged	EUR 275.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDER

On these piston and cylinder sets it is necessary to rebore the crank case or the cylinder heads.


010-0515	Piston and cylinder set, 90.5 x 69 mm, 1776 ccm, for standard crank shaft	EUR 269.00 VAT included, plus freight cost

010-0515-04	Piston and cylinder, 90,5 x 69 mm, 1780 ccm, single	EUR 73.00 VAT included, plus freight cost

010-0517	Piston and cylinder set, 92 x 69 mm, 1835 ccm, for standard crank shaft	EUR 265.00 VAT included, plus freight cost

010-0517-04	Piston and cylinder, 92 x 69 mm, 1835 ccm, single	EUR 73.00 VAT included, plus freight cost

010-0519	Piston and cylinder set, 94 x 69 mm, 1915 ccm	EUR 275.00 VAT included, plus freight cost

010-0519-04	Piston and cylinder set, 94 x 69 mm, single	EUR 75.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDER

For crankshafts with big stroke. Crank case and cylinders heads have to be rebored.


010-0450	Piston and cylinder set, 90.5 x 82 mm, 2100 ccm	EUR 269.00 VAT included, plus freight cost

010-0460	Piston and cylinder set, 92 x 82 mm, 2180 ccm	EUR 269.00 VAT included, plus freight cost

010-0467	Piston and cylinder set, 94 x 82 mm, 2300 ccm	EUR 285.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

PISTON AND CYLINDERS, BUS T2

Comes as complete kit with:

4 pistons with wrist pins and locks
4 cylinders and
4 sets of piston rings


010-0470	Piston and cylinder set, 94 x 71 mm, Bus T2, 2000 ccm, 8.75 - 12.82	EUR 319.00 VAT included, plus freight cost

Enclosed each kit is a table which shows the
correct boresize for cylinderhead and crank case.

TEFLON WRIST PIN BUTTONS

Teflon wrist pin buttons are easy to install and will not brake or wear out. You can install Teflon wrist pin buttons in less time than stock clips. Teflon buttons ar shipped in complete sets for one engine.


020-0280	Teflon wrist pin buttons, for 85.5 pistons, set	EUR 19.90 VAT included, plus freight cost

020-0282	Teflon wrist pin buttons, for 87 pistons, set	EUR 19.90 VAT included, plus freight cost

020-0284	Teflon wrist pin buttons buttons, for 88 pistons, set	EUR 19.90 VAT included, plus freight cost

020-0286	Teflon wrist pin buttons, for 90.5 pistons, set	EUR 19.90 VAT included, plus freight cost

020-0288	Teflon wrist pin buttons, for 92.5 pistons, set	EUR 19.90 VAT included, plus freight cost

020-0290	Teflon wrist pin buttons, for 94 pistons, set	EUR 19.90 VAT included, plus freight cost

page 1 I page 2 I page 3

Hoffmann Speedster Teile Vertriebs GmbH
Gerberstr. 138-142
D - 41748 Viersen
Tel: +49 / 21 62 / 93 26 14
Fax: +49 / 21 62 / 3 36 48
e-mail: info@hoffmann-speedster.com

	Teile Vertriebs GmbH Gerberstr. 138-142 D - 41748 Viersen / Germany Tel. +49 / 21 62 / 93 26 14 Fax +49 / 21 62 / 3 36 48			catalog	How to order	Search
	Beetle		Golf & Co.	Bus T1, T2 + T3	Karmann Ghia	Porsche